Chrysler Grand Voyager Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chrysler Grand Voyager Car Battery Replacement is $324 with $184 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chrysler Grand VoyagerV6-3.0LService typeCar Battery ReplacementEstimate$522.16Shop/Dealer Price$617.55 - $895.62
2000 Chrysler Grand VoyagerV6-3.3LService typeCar Battery ReplacementEstimate$513.15Shop/Dealer Price$606.77 - $883.52
Show example Chrysler Grand Voyager Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Robert

33 years of experience
191 reviews
Robert
33 years of experience
Chrysler Grand Voyager V6-3.3L - Check Engine Light is on - San Jose, California
Oil leak. Robert was professional and did an excellent job. The cost was very reasonable. I was very pleased with his service! I would use his service again!

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Chrysler Grand Voyager V6-3.3L - Oil Change - Albuquerque, New Mexico
We have used Victor many times now for work on our vehicle. We will continue to use him for all our vehicle service needs. He is prompt, courteous, knowledgeable and professional. I never have to worry about the work being completed or if there will be any issues. Its done right the 1st time! The convenience and pricing are exceptional values.

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Chrysler Grand Voyager V6-3.3L - Starter - Albuquerque, New Mexico
Victor arrived on time; very personable; got right to work; had repair completed in one hour. Was very thorough and went over all spects of work to be done kept me informed of progress along the way. I will definitely be using Victor again. The service cost was less than shop price and worth every penny spent.

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Chrysler Grand Voyager V6-3.3L - Brakes, Steering and Suspension System - Vancouver, Washington
Very pleased with Jose, he was very efficient and thorough. He really knows what he is doing.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Chrysler Grand Voyager services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Diagnose Problems With Your Suspension System
Many car owners become aware that it is time to investigate their vehicle's suspension components when their car starts to...
P0042 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 1 Sensor 3)
P0042 P0042 code definition P0042 is telling us the ECM has detected a fault in the heated oxygen sensor control circuit for bank 1 sensor 3. This can be associated with P0043 and P0044 What the P0042 code means The...
The Top Seasonal Car Repairs
Cars Cars are complex machines. The performance of your car can be affected by many factors, from the age of the car and its various parts, to how it is driven. Because of all the factors affecting your car and...

Heated windshield not working.

It appears that you may actually be experiencing two different issues with your Mustang. I do not believe the two are related so we will look at each concern independently. In regards to the rear window defroster, it is quite...

When I start up my car, it makes a rattling noise that continues as I drive.

Hi there. This is a common problem with your car. It is a timing chain problem (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-chain). The timing chain wears out and stretches causing this. It requires that the front timing cover be removed and all of the timing...

Car not starting

Hi there: It's very possible that during your intake manifold swap out that the crankshaft position sensor may have been damaged or incorrectly reinstalled; as I believe that needs to be removed in order to replace the intake manifold on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com