Chrysler Crossfire Headlight Dimmer Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(111)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(111)

Headlight Dimmer Switch Replacement Service

How much does a Headlight Dimmer Switch Replacement cost?

On average, the cost for a Chrysler Crossfire Headlight Dimmer Switch Replacement is $445 with $350 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Chrysler CrossfireV6-3.2LService typeHeadlight Dimmer Switch ReplacementEstimate$815.75Shop/Dealer Price$1000.94 - $1534.01
2005 Chrysler CrossfireV6-3.2LService typeHeadlight Dimmer Switch ReplacementEstimate$795.75Shop/Dealer Price$980.96 - $1514.04
2008 Chrysler CrossfireV6-3.2LService typeHeadlight Dimmer Switch ReplacementEstimate$795.75Shop/Dealer Price$980.96 - $1514.04
2006 Chrysler CrossfireV6-3.2LService typeHeadlight Dimmer Switch ReplacementEstimate$795.75Shop/Dealer Price$980.94 - $1514.00
2006 Chrysler CrossfireV6-3.2L TurboService typeHeadlight Dimmer Switch ReplacementEstimate$795.75Shop/Dealer Price$980.97 - $1514.07
2005 Chrysler CrossfireV6-3.2L TurboService typeHeadlight Dimmer Switch ReplacementEstimate$795.75Shop/Dealer Price$980.96 - $1514.04
2007 Chrysler CrossfireV6-3.2LService typeHeadlight Dimmer Switch ReplacementEstimate$800.75Shop/Dealer Price$985.82 - $1518.80
Show example Chrysler Crossfire Headlight Dimmer Switch Replacement prices

What is the Headlamp Dimmer Switch all about?

The headlamp dimmer switch may be part of the turn signal switch or it can be mounted on the floor. This switch enables you to dim the headlamp beam from low to high or vice versa. A bad switch will not change the headlamp beam. Your headlamps being stuck on high beams can create a dangerous situation for oncoming drivers.

Keep in mind:

  • In many vehicles, the dimmer switch is part of a multi-switch that also controls the windshield wipers, turn signals, and cruise control. *Replacing this multi-switch means all of those components will need to be re-wired.

How it's done:

  • Inspect the switch.
  • Remove and replace the faulty switch.
  • Check operation of the headlamps and verify the high/low beam switching.

Our recommendation:

It should be noticeable when your headlamp dimmer switch stops working. If you find that your vehicle is unable to alternate between high and low beams, then you should schedule a service.

What common symptoms indicate you may need to replace the Headlamp Dimmer Switch?

  • Lights will not change between high and low beams. They will be stuck on one or the other.
  • Headlamps will not stay on high-beam setting.

How important is this service?

The headlamp dimmer switch allows you to select between your headlamp's high and low beams. When you pull the lever on your steering wheel column, the dimmer switch triggers the high beams, and either turns them on or turns them off. When the headlamp dimmer switch malfunctions, your headlights won’t be able to switch between high and low. You’ll either be stuck with only low beams, which can mean poor visibility, or you’ll be stuck with only high beams, which is hazardous to the drivers around you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(111)

Rating Summary
100
6
3
0
2
100
6
3
0
2

Robert

37 years of experience
237 reviews
Robert
37 years of experience
Chrysler Crossfire V6-3.2L - Spark Plugs - Atlanta, Georgia
My Mechanic

Dominic

28 years of experience
228 reviews
Dominic
28 years of experience
Chrysler Crossfire V6-3.2L - Car is not starting - Punta Gorda, Florida
Very knowledgeable and helpful. Will use again and recommend

Anthony

28 years of experience
113 reviews
Anthony
28 years of experience
Chrysler Crossfire V6-3.2L - Car is not starting Inspection - Riverhead, New York
Anthony is very good, he new what he was doing show me, and did it, he also a good person.

Richard

21 years of experience
461 reviews
Richard
21 years of experience
Chrysler Crossfire V6-3.2L - Crankshaft Position Sensor - Atlanta, Georgia
Very polite and professional, and knows the vehicle - thank you again!

Excellent Rating

(111)

Rating Summary
100
6
3
0
2
100
6
3
0
2
Number of Chrysler Crossfire services completed
1221+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You’re a Painter
If If you’re a painter, and you work for someone else, chances are you don’t care all that much about what you drive, as long as it gets you to and from work reliably. On the other hand, if you...
How to Buy a Good Quality Crankshaft Position Sensor
Just Just like the name indicates, the crankshaft position sensor monitors the rotation speed and position of the crankshaft. The crankshaft is what turns the engine’s piston power into a force that can actually move the vehicle. Its position must...
How to Check Your Tires for Air Leaks
Your Your tires go through a lot of abuse on the road in order for your ride to be smooth, quiet, comfortable, and safe. Taking care of your tires is essential in order to get as many miles out of...

Stalling and misfiring at idle on a 1999 BMW Z3

Those things are notorious for getting vacuum leaks on them because the tops of the engines are all made out of plastic--including the intake system. Especially on the driver's side, there are all kinds of plastic piping. You'd want to...

1998 Nissan Cube (Japan) drive belt part number

The Nissan Cube was not sold in America until 2009. This model was a third generation compared to Japan's 1998 version which was the first generation. You may have to call the dealer or a local parts store to see...

Sounds when turning.

This may be a sign of failing or worn out wheel bearings. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the surface of the rollers...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com