Chevrolet Venture Steering wheel feels loose Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(128)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(128)

Steering wheel feels loose Inspection Service

How much does a Steering wheel feels loose Inspection cost?

On average, the cost for a Chevrolet Venture Steering wheel feels loose Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2000 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1998 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2003 Chevrolet VentureV6-3.4LService typeSteering wheel feels loose InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Venture Steering wheel feels loose Inspection prices

A steering wheel that feels loose or has “play” in it prevents the driver form getting an accurate interpretation of how the wheels are turned. Any steering setup where you can move the wheel more than one to one and a half inches without moving the wheels is too lose and may have an issue. When the steering wheel feels loose it can be difficult from drivers to accurately know the position of the front wheels. This lack of responsiveness can be dangerous for drivers, especially in heavy traffic or winding roads.

How this system works:

The majority of modern vehicles use two different kinds of steering setup to help control the movement of the car. Rack and pinion steering is typically used on cars, small trucks and SUVs, while recirculating-ball steering is used on large SUVs and trucks. The similarities and differences in the two systems begin to manifest themselves when components fail, causing the steering wheel to feel loose.

Common reasons for this to happen:

  • Worn Tie Rods: Tie rods serve as the driver’s connection between the steering unit and the tires. Tie rods are present in both rack and pinion and recirculating ball setups. If tie rod ends become worn, they may cause the steering wheel to feel loose. A vehicle with worn tie rods may also squeak as the steering wheel is turned and be out of alignment.

  • Worn Pitman Arm: A pitman arm is only present in vehicles with recirculating-ball steering. The pitman arm connects a gear attached to the steering wheel to the steering rack itself. When the pitman arm becomes worn or the teeth in the gear connecting the pitman arm begin to slip, it can cause the steering wheel to feel loose.

  • Worn Ball Joint: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. A ball joint that is worn may cause the steering to feel loose and may also create a banging sound, especially when going over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the loose-feeling steering. The mechanic will then provide a detailed inspection report outlining the reason for the loose steering and the cost of any repairs that need to be made.

How it's done:

When the mechanic arrives, he or she will first lift the vehicle and remove the wheels so that they can better access the suspension and steering components. From here, the mechanic will be able to assess the reason why the steering has become loose.

If the mechanic suspects that worn tie rods may be the issue, he or she will inspect the tie rod for superficial damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

If the mechanic believes that the pitman arm has become worn, he or she will remove the pitman arm from the track bar and replace it with a new pitman arm. The mechanic should ensure that the new part is properly tightened.

If the mechanic suspects worn ball joints, he or she will remove the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

In the case of all repairs the mechanic will make sure that all the new parts have been installed correctly and are properly lubricated. In order to ensure that the steering is working properly, the mechanic may test drive the vehicle to check for excess play.

How important is this service?

A steering wheel that feels loose may not be giving an accurate indication of the front wheel’s position. Loose-feeling steering may also indicate that a problem has occurred with the steering unit or suspension. If you notice that the steering does not seem to be as responsive, you should stop driving the vehicle and have it inspected by a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(128)

Rating Summary
118
7
1
1
1
118
7
1
1
1

James

30 years of experience
897 reviews
James
30 years of experience
Chevrolet Venture V6-3.4L - Car is overheating - Orlando, Florida
Mr. James is outstanding in every way. He is most professional as well as very knowledgeable. He has been here before and when he arrived today I was most relieved. He cares for his clients as if we were family. I cannot sing enough praises for the man1 Thanks Mr. J.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Chevrolet Venture V6-3.4L - Windshield Wiper Blade - Jacksonville, Florida
Joel is great!!

Andrew

14 years of experience
104 reviews
Andrew
14 years of experience
Chevrolet Venture V6-3.4L - Car is making a noise - Lakewood, Washington
Very good experience with Somich. Very easy to work with him.

Peter

27 years of experience
86 reviews
Peter
27 years of experience
Chevrolet Venture V6-3.4L - Check Engine Light is on - Selma, California
There was still a problem with engine light being on after work was done replacing injector Peter came back out and checked all wiring etc and came to conclusion that the injector must hv been bad even tho it was new. Thanks Peter for not talking down to me but explained the situation.

Excellent Rating

(128)

Rating Summary
118
7
1
1
1
118
7
1
1
1
Number of Chevrolet Venture services completed
1408+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How Long Does a Thermostat Last?
No No matter what kind of car or truck you drive, it has a thermostat in it. This thermostat is responsible for monitoring and regulating the coolant temperature in your vehicle's engine. If you were to look at the thermostat...
How to Change Battery Cables
Although simple in nature, battery cables (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-battery-cable) are one of the most important components of a vehicle’s electrical system. They serve as...
How to Use a Ratchet on a Car
Ratchets are hand-held mechanic tools used with sockets to remove or tighten bolts or lug nuts. Ratchets use leverage in a free-spinning motion.

Bad steering system in my car, didn’t pass inspection

There is nothing that an owner of a 2009 Chevy Traverse, or most GM vehicles from 2007 thru 2011 that are equipped with this design power steering pumps/Rack and Pinions, can do to prevent these failures. Chevrolet has known about...

How do I adjust the lumbar support on the bucket seats?

Lumbar support is a convenient feature that makes long trips much more comfortable. Proper lumbar support makes the seat more evenly support the passenger. In a truck with manual bucket seats, the lumbar support is adjusted by spinning a 5-pointed...

What does the liftgate ajar Warning Light mean?

The liftgate ajar Warning Light is located on the instrument panel. This light illuminates when your trunk is not properly closed. Secure your trunk properly, and the light will turn off.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com