Chevrolet Venture Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chevrolet Venture Power Steering Pump Replacement is $302 with $106 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$429.88Shop/Dealer Price$488.14 - $651.58
2004 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$442.99Shop/Dealer Price$505.20 - $686.08
2000 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$417.27Shop/Dealer Price$473.09 - $634.70
1999 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$417.27Shop/Dealer Price$473.09 - $634.70
2001 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$417.27Shop/Dealer Price$475.15 - $638.31
1997 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$417.27Shop/Dealer Price$473.28 - $635.04
1998 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$417.27Shop/Dealer Price$473.11 - $634.74
2005 Chevrolet VentureV6-3.4LService typePower Steering Pump ReplacementEstimate$442.99Shop/Dealer Price$505.24 - $686.14
Show example Chevrolet Venture Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Chevrolet Venture Power Steering Pump Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Often Do I Need to Replace My Car's Differential Fluid?
Many folks do not even know what the differential does. It is not one of those common car parts like the transmission or...
How to Prepare for the Indiana Driver’s Written Test
If If you are looking forward to finally getting your driver’s license, you might not be quite as excited about the need to take a written test before you can get your permit. Many people do not like the thought...
P0131 OBD-II Trouble Code: O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
P0131 code definition The P0131 code is low sensor voltage for oxygen sensor bank 1 sensor 1 or improper air fuel ratio....

Horn doesn't work

It seems you have three issues. Any issue with a seat belt will require it to be replaced (e.g., frayed webbing, inability to retract or buckle, etc.) It's too risky to attempt repairs with something that important. The broken horn...

I replace the hood of my 2009 Chevy Impala with the hood of a 2007 Chevy Impala

Yes. The reference I checked, says that 2006-2013 will work.

Put the key in the ignition and the car will turn on, but the steering wheel will not turn...Locked in position.

It sounds as though the locking pawl is jammed in position. Sometimes that can happen if there is a side force on the steering when the lock is engaged. If the car is parked against a curb, or if the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com