Chevrolet V3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(40)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(40)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet V3500 Front Crankshaft Seal Replacement is $255 with $17 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet V3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$302.72Shop/Dealer Price$318.65 - $352.65
1991 Chevrolet V3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$1347.34Shop/Dealer Price$1625.25 - $2451.96
1990 Chevrolet V3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$300.37 - $332.15
1990 Chevrolet V3500V8-5.7LService typeFront Crankshaft Seal ReplacementEstimate$1347.34Shop/Dealer Price$1625.29 - $2452.03
1991 Chevrolet V3500V8-7.4LService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$302.87 - $336.53
1991 Chevrolet V3500V8-6.2L DieselService typeFront Crankshaft Seal ReplacementEstimate$287.40Shop/Dealer Price$300.61 - $332.57
Show example Chevrolet V3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(40)

Rating Summary
35
2
1
0
2
35
2
1
0
2

Johnny

34 years of experience
392 reviews
Johnny
34 years of experience
Chevrolet Equinox L4-2.4L - Front Crankshaft Seal - Antelope, California
I felt Johnny was very competent and knowledgeable very nice too!

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
Chevrolet Equinox L4-2.4L - Front Crankshaft Seal - Norcross, Georgia
Very professional

Junior

27 years of experience
69 reviews
Junior
27 years of experience
Chevrolet Malibu V6-3.1L - Front Crankshaft Seal - Hollywood, Florida
Highly recommend Junior and "your mechanic". awesome company , lowest prices and pro mechanics, Try them , you wont regret it

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Chevrolet Silverado 1500 V6-4.3L - Front Crankshaft Seal - Dana Point, California
He is a qualified mechanic and does a good job. On tigh he is a qualified mechanic and does a good job. On Time

Excellent Rating

(40)

Rating Summary
35
2
1
0
2
35
2
1
0
2
Number of Chevrolet Front Crankshaft Seal Replacement services completed
440+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P2035 OBD-II Trouble Code: Exhaust Gas Temperature (EGT) Sensor Circuit Low Voltage Bank 2 Sensor 2
P2035 P2035 code definition Exhaust Gas Temperature (EGT) Sensor Circuit Low Voltage Bank 2 Sensor 2 Bank 2 refers to the back of cylinders without the number one cylinder. Sensor 2 would be the second EGT sensor from the motor...
How to Buy a Good Quality Thermostat
While While many people are familiar with the major parts in their vehicle, there are all kinds of smaller parts that play a vital role as well. The thermostat is one of those parts that many don't think about, but...
How Long Does a Fuel Injection Line Last?
Most Most car owners are unaware about just how complex their fuel system is. In order for a car to run and operate as intended, many different components will need to work together. The fuel injectors on your car deliver...

after replacing spark plugs and wires engine light still come on should i replace the O2 sensor as diagnose suggested if so which

Hello. If the scanner indicated the O2 sensor was bad (https://www.yourmechanic.com/services/oxygen-sensor-replacement), I would recommend replacing. The oxygen sensors are located in the exhaust system of the engine, and they sense the oxygen content of the exhaust gases. There should be...

Misfire in cylinder #4

You should be fine to drive for a day or two with a misfire on one cylinder, however I would not recommend letting this go un-repaired as this is something will only get worse and may trigger additional problems and...

All my gears work but drive and 3rd gear

Hello, thank you for writing in. The vehicle is likely experiencing issues with the transmission. The first step to take is having the vehicle scanned for diagnostic codes, and use them to help point you in the right direction. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com