Chevrolet V2500 Suburban Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Chevrolet V2500 Suburban Exhaust Gas Recirculation/EGR Valve Replacement is $209 with $69 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chevrolet V2500 SuburbanV8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$292.30Shop/Dealer Price$330.23 - $435.90
1991 Chevrolet V2500 SuburbanV8-6.2L DieselService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$659.31Shop/Dealer Price$789.47 - $1175.84
1990 Chevrolet V2500 SuburbanV8-6.2L DieselService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$659.31Shop/Dealer Price$789.50 - $1175.88
1990 Chevrolet V2500 SuburbanV8-5.7LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$283.29Shop/Dealer Price$319.47 - $423.84
1990 Chevrolet V2500 SuburbanV8-7.4LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$310.37Shop/Dealer Price$354.80 - $480.58
Show example Chevrolet V2500 Suburban Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Chevrolet V2500 Suburban V8-5.7L - Starter - Sandy, Texas
Arrived a little bit early and finished in under an hour. Charles thoroughly test the vehicle to make sure it worked as expected. I could not have asked for more.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Chevrolet G30 V8-5.7L - Exhaust Gas Recirculation/EGR Valve - Denver, Colorado
Robert was punctual and knowledgeable

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Chevrolet Impala * - Exhaust Gas Recirculation/EGR Valve - Lawrenceville, Georgia
Nice guy, works fast

Jose

17 years of experience
324 reviews
Jose
17 years of experience
Chevrolet Malibu V6-3.1L - Exhaust Gas Recirculation/EGR Valve - Fort Lauderdale, Florida
Jose was very professional and very knowledgeable.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Chevrolet Exhaust Gas Recirculation/EGR Valve Replacement services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0478 OBD-II Trouble Code: Exhaust Pressure Control Valve High
P0478 code means that there is an abnormally high voltage reading often due to the exhaust system back pressure control valve circuit.
Bad Throttle Position Sensor (TPS) Symptoms
Find vehicle issues early by learning the symptoms of a bad throttle position sensor. Catch a faulty TPS early with YourMechanic.
How to Use a Ball Joint Press
Ball joints support a hub that connects car tires with the wheel assembly. A ball joint press installs and removes ball joints from the socket.

Need to know which transmission I have in my vehicle.

Your vehicle has a A518/46RE type of transmission for the year of 2000. This model fits from the vehicle years of 1998 through 2002.

I have a 2007 NissanMurano 169,000 miles. It is jerking while accelerating but no check engine light is on.

Hello, thank you for writing in. The first task to take on is finding out if the jerking is coming from the engine or wheels. Also keep in mind, even without a check engine light on, there may be a...

What would make my 2003 dodge ram shut off in the middle of the high way? Once on the side the car would not start.

Hi there. Typically when an engine shuts off while under acceleration, it is caused by an instant reduction in fuel flow or an ignition system component that failed. Among the leading candidates include, fuel pump failure, fuel pump relay, or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com