Chevrolet Silverado 1500 Classic Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Silverado 1500 Classic Fuel Injector Replacement is $1380 with $1184 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 1500 ClassicV6-4.3LService typeFuel Injector ReplacementEstimate$2981.84Shop/Dealer Price$3678.09 - $5755.50
2007 Chevrolet Silverado 1500 ClassicV8-4.8LService typeFuel Injector ReplacementEstimate$2571.63Shop/Dealer Price$3166.00 - $4943.36
2007 Chevrolet Silverado 1500 ClassicV8-5.3L HybridService typeFuel Injector ReplacementEstimate$2571.63Shop/Dealer Price$3166.04 - $4943.42
2007 Chevrolet Silverado 1500 ClassicV8-5.3LService typeFuel Injector ReplacementEstimate$2571.63Shop/Dealer Price$3166.04 - $4943.42
2007 Chevrolet Silverado 1500 ClassicV8-6.0LService typeFuel Injector ReplacementEstimate$2571.63Shop/Dealer Price$3168.10 - $4947.03
Show example Chevrolet Silverado 1500 Classic Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(26)

Rating Summary
24
1
0
1
0
24
1
0
1
0

James

32 years of experience
705 reviews
James
32 years of experience
Chevrolet Silverado 1500 Classic V8-4.8L - Brake fluid is leaking - Garden Grove, California
He was wonderful Best job ever. I will have him back for all of my cars. He was clean and Professional.

Diego

22 years of experience
564 reviews
Diego
22 years of experience
Chevrolet Silverado 1500 Classic V8-5.3L - Car Fuse Replacement - Peoria, Arizona
A+ was very professional and early to appointment. Highly recommended.

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Chevrolet Silverado 1500 Classic V8-5.3L - Mass Airflow Sensor - Scottsdale, Arizona
Peter was actually early to the appointment. He was very courteous, knowledgeable, and helpful

Abel

24 years of experience
33 reviews
Abel
24 years of experience
Chevrolet Silverado 1500 Classic V8-4.8L - Car is hard to shift - Fort Worth, Texas
Abel was very nice, professional, and knowledgeable.

Excellent Rating

(26)

Rating Summary
24
1
0
1
0
24
1
0
1
0
Number of Chevrolet Silverado 1500 Classic services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Import a Car From Europe
While most people simply go to a local dealership or a nearby individual to purchase a new car, you may feel that you must simply have a car from across the pond in Europe. You may be a collector, itching...
Common Signs Your Drive Belt Is Misaligned
Drive Drive belt problems usually manifest as noise. If you have a noisy drive belt, it’s important to know what’s causing it so that it can be fixed. That means you have to listen. If the drive belt or serpentine...
How to Look Up License Plate Numbers
People People across the nation perform license plate number searches every day. Some of the reasons for searching for information linked to a license plate number include finding out the identity of a hit-and-run driver or a reckless driver, or...

Car door handle from outside is got free and on pushing, it is felt very light and does not open the door.

Hi there. Based on what you have written above, it is probably a good idea to have a professional mobile mechanic come to your location and complete a door handle is not working inspection (https://www.yourmechanic.com/services/door-will-not-open-inspection). This will allow them to...

Can i do a 370z engine/manual tranmission swap to a nissan altima s 2008 sedan

The 370z engine is a 3.7L V6 (Type VQ37VHR). It uses a completely different engine computer and consequently, you would have to carry over the entire electrical system from the 370z to the Altima. The suspension and alignment of the...

Which of the following is most likely to be caused by too cold of a temperature in the transmission fluid?

Claimed by Kevin Gainer

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com