Chevrolet S10 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(315)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(315)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Chevrolet S10 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Chevrolet S10V6-2.8LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Chevrolet S10V6-4.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Chevrolet S10V6-4.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Chevrolet S10V6-4.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1982 Chevrolet S10V6-2.8LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Chevrolet S10L4-2.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Chevrolet S10V6-4.3LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Chevrolet S10L4-2.5LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet S10 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(315)

Rating Summary
294
10
3
1
7
294
10
3
1
7

Miguel

35 years of experience
258 reviews
Miguel
35 years of experience
Chevrolet S10 L4-2.2L - Alternator - Jacksonville, Florida
Great work and the job was done so fast!!

Jordan

9 years of experience
59 reviews
Jordan
9 years of experience
Chevrolet S10 L4-2.2L - Check Engine Light is on - Austin, Texas
Great!

Duane

25 years of experience
515 reviews
Duane
25 years of experience
Chevrolet S10 V6-4.3L - Check Engine Light is on - Chula Vista, California
Outstanding mechanic who used every trick he knew to solve my problem, but my check engine light is still on and drivability is still not good. Further work is needed and I will book an appointment with Duane, when I have the money .

Joe

43 years of experience
823 reviews
Joe
43 years of experience
Chevrolet S10 L4-2.2L - remove after alarm switch - Tampa, Florida
Joe is a great guy very good mechanic very friendly very professional

Excellent Rating

(315)

Rating Summary
294
10
3
1
7
294
10
3
1
7
Number of Chevrolet S10 services completed
3465+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Gasket
There There are a wide variety of gasket types on a typical vehicle, from head gaskets which are installed between the cylinder head and the engine block to engine gaskets which seal out harmful elements and keep the engine safe...
Symptoms of a Bad or Failing Valve Cover Gasket
Common signs of a faulty gasket include a burning oil smell, dirty valve cover, oil leaks, low engine oil, and a rough-running engine that misfires.
P0798 OBD-II Trouble Code: Pressure Control Solenoid “C” Electrical
P0798 means there is a problem with the electronic pressure control solenoid or solenoid circuit due to low or dirty transmission fluid.

My check engine light came on and the it was diagnosed as op128 so I got gas screwed on my cap and my light turned off how is this

First, a trouble code P0128 (https://www.yourmechanic.com/article/p0033-obd-ii-trouble-code-turbo-charger-or-supercharger-bypass-valve-control-circuit-by-john-nelson) does have to do with coolant, but it is not the level. This code is set when the relationship between the coolant temperature sensor and the intake air temperature sensor don't increase at a...

Temperature gauge going up and down

Hi there. The issue is the thermostat. It is sticking about half way and not opening all the way up or it has a lot of calcium buildup. I recommend replacing the thermostat (https://www.yourmechanic.com/services/thermostat-replacement) and flushing the coolant out (https://www.yourmechanic.com/services/cooling-system-flush)...

Wondering whether I can use prestone 5050 antifreeze coolant instead of fl22.?

While the green coolant or "safe for use in all vehicles" type coolants may be less expensive than what is in your cooling system, I HIGHLY recommend you do not mix them. Different coolants have different chemical properties. They can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com