Chevrolet S10 Blazer Car is not starting Inspection at your home or office.

Common reasons for this to happen:

If the engine cranks, but the car doesn't start:

• Bad fuel pump: A faulty fuel pump won't deliver fuel to the engine, even if you've just filled up.

• Bad spark plugs: Without hot sparks to ignite the fuel charge in each cylinder, there is no combustion and no expansion of the burning mixture. Thus, the engine will not start.

• Bad timing belt: If the timing belt stretches or breaks, the engine will not run. Moreover, continuing to crank the engine may bring the valves into contact with the piston, causing serious engine damage.

• Bad ignition coil: Without a functional coil to step up the voltage, there can be no spark. No spark means no start.

• Faulty cam or crank sensor: If the sensors are faulty they will either provide no information to the ignition system, or will provide incorrect data. Either way, the engine will not fire.

If nothing happens after you turn the key:

• Bad battery or terminals: Batteries have a finite lifespan, and terminals can loosen or corrode.

• Bad starter: This should be obvious from the response to the key. If nothing happens at all when you turn the key, the starter may have reached the end of its life.

• Ignition problem: This could be due to faulty contacts in the ignition switch, or in the wiring.

If there is a grinding noise when you turn the key:

• Starter is bad: Do not persist in cranking the engine.