Chevrolet Prizm Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(68)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(68)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Chevrolet Prizm Fuel Injector Replacement is $817 with $677 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet PrizmL4-1.8LService typeFuel Injector ReplacementEstimate$1539.58Shop/Dealer Price$1889.33 - $2930.46
2001 Chevrolet PrizmL4-1.8LService typeFuel Injector ReplacementEstimate$1530.57Shop/Dealer Price$1878.55 - $2918.36
1999 Chevrolet PrizmL4-1.8LService typeFuel Injector ReplacementEstimate$1500.27Shop/Dealer Price$1840.70 - $2857.80
1998 Chevrolet PrizmL4-1.8LService typeFuel Injector ReplacementEstimate$1508.53Shop/Dealer Price$1851.02 - $2874.32
2000 Chevrolet PrizmL4-1.8LService typeFuel Injector ReplacementEstimate$1530.57Shop/Dealer Price$1880.05 - $2920.98
Show example Chevrolet Prizm Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(68)

Rating Summary
64
0
1
1
2
64
0
1
1
2

Rodney

30 years of experience
574 reviews
Rodney
30 years of experience
Prizm 2001 - Evaporative Emission Control Canister - Sacramento, CA
Very professional and well mannered. Came out, did the install and gave me a couple of pointers as well. Very satisfied customer.

Anthony

10 years of experience
49 reviews
Anthony
10 years of experience
Prizm 2000 - Valve Cover Gasket - Naperville, IL
Very helpful, answered questions unrelated to the service performed. I will definitely request him again. He was early, completed on time.

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Prizm 1998 - Car is not starting - Hyattsville, MD
Excellent service!

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Prizm 1998 - Battery - Hyattsville, MD
Excellent service!

Excellent Rating

(68)

Rating Summary
64
0
1
1
2
64
0
1
1
2
Number of Chevrolet Prizm services completed
748+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Read and Understand Check Engine Light (OBD-II) Codes
The Check Engine Light indicates a trouble code stored in the car’s computer and can indicate a number of issues.
Writing Off Your Business Miles: A Crash Course
Track the miles you drive for work to deduct the cost from your taxes. Use a mileage log to give an accurate number to the government.
How to Locate Cars for Sale by Private Sellers
When shopping for a used car (https://www.yourmechanic.com/article/what-steps-must-i-take-before-buying-a-used-car), dealership may not always be an option. Maybe your credit is not good enough (https://www.yourmechanic.com/article/how-to-buy-a-car-with-bad-credit), or you cannot afford to pay the asking price. In such cases, buying a car from a private...

Emergency brake lever broke

Hi. I'm not sure if you mean the cable broke of the lever itself. In any case, you'll need to replace the failed components in order to fix your vehicle. There is no workaround way to release the emergency brake....

Steering wheel resistance at 12 o'clock position

Hi there, thank you for writing about your 2013 Audi S5. Your vehicle has electrically-assisted steering, so your car's power steering module may be causing the steering problems. Audi has a software update for the power steering module - Ref:...

Hi i have an assignment regarding the car parts am i allowed to ask ?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com