Chevrolet Metro Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Chevrolet Metro Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Chevrolet MetroL4-1.3LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1998 Chevrolet MetroL3-1.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Chevrolet MetroL3-1.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Chevrolet MetroL4-1.3LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1999 Chevrolet MetroL4-1.3LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1999 Chevrolet MetroL3-1.0LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Chevrolet MetroL4-1.3LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1998 Chevrolet MetroL4-1.3LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Metro Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Chevrolet Metro L4-1.3L - Car Inspection - Los Angeles, California
He is top notch and his knowledge of the mechanics of my old jalopy gives me the confidence to have him provide the services to get my vehicle road worthy again.

Fabrice

20 years of experience
134 reviews
Fabrice
20 years of experience
Chevrolet Metro L3-1.0L - Car Inspection - Orlando, Florida
Fabrice did an excellent job diagnosing a coolant leak (which I originally thought was a water pump leak meaning a timing belt replacement), and went above and beyond when finding and replacing an O-ring which is no longer available even in aftermarket. Fabrice is ASE certified - that should be added to his mechanic profile.

Nicholas

21 years of experience
354 reviews
Nicholas
21 years of experience
Chevrolet Metro L4-1.3L - Oil Change - Denver, Colorado
Always the best mechanic!! Tells me what is wrong with my car and fixes the problem quickly and efficiently and let's me know any repairs that may be coming up to better plan!!

Raymond

37 years of experience
407 reviews
Raymond
37 years of experience
Chevrolet Metro L4-1.3L - inspect belts and pulleys - North Las Vegas, Nevada
Hes a great,honest mechanic,very smart

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Chevrolet Metro services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Engine
Replacing Replacing an engine sounds like an incredibly expensive thing to do, but when you compare the cost of repowering or replacing an engine to the cost of purchasing a new vehicle, the replacement cost becomes much more palatable, quickly....
The Traveler’s Guide to Driving in Denmark
Denmark Denmark is a country full of history and interesting places (http://www.visitdenmark.com/guide/denmarks-most-visited-attractions) to visit. It’s very popular with travelers for the beauty of the country and the friendliness of the people. You might want to visit Tivoli Gardens in Copenhagen....
P0266 OBD-II Trouble Code: Cylinder 2 Contribution/Balance Fault
P0266 P0266 code definition Cylinder 2 Contribution/Balance Fault What the P0266 code means This diagnostic trouble code (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) indicates that the powertrain control module (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) has detected that the reference voltage from the fuel injector on cylinder 2 has fallen...

Dead animal inside vents of vehicle.

I have seen a family of mice make a home inside the heater blower case. You may need to have the entire heater blower case removed, thoroughly cleaned out, and sanitized (https://www.yourmechanic.com/services/ac-is-not-working-inspection). This may be the only way to remove...

P0733, P0734, P792, P490, P1790 after mechanic rebuilt engine

I think these codes may be explained by an electrical harness connector that is unplugged. The first two codes refer to the transmission ratios and the P0792 is for a speed sensor. The lack of a speed sensor signal could...

My car won't stop unless I floor the brake pedal. Brake Check replaced the booster, and the brakes locked up. 5000 rpms just to go

Hi there. The best advice I can offer is to let a professional mechanic come to your location and complete a brake system inspection as soon as possible (https://www.yourmechanic.com/services/brake-system-inspection). There are too many possible issues to list, especially possible ABS...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com