Chevrolet LCF 3500HG Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(16,565)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(16,565)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Chevrolet LCF 3500HG Parking brake is stuck Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Chevrolet LCF 3500HGV8-6.6LService typeParking brake is stuck InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
Show example Chevrolet LCF 3500HG Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(16,565)

Rating Summary
15,544
503
119
93
306
15,544
503
119
93
306

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
Chevrolet Tahoe V8-5.3L - Car is not starting - Fresno, California
Jonathan was very knowledgeable in diagnosing my No start issue . He covered all the bases over and over and over. definitely a thorough technician ...thank you your mechanic!

William

35 years of experience
731 reviews
William
35 years of experience
Chevrolet Camaro L6-4.1L - Brake Shoes (Rear) - Sun City West, Arizona
William always comes thru with his quality work that is why I would use him again. He was able to replace my rear brakes on my Chevy. No glitches there, job well done ,

Jonathan

14 years of experience
171 reviews
Jonathan
14 years of experience
Chevrolet Silverado 1500 V8-5.3L - Brake System Flush - Attleboro, Massachusetts
Very professional and very personable.

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Chevrolet Suburban 1500 V8-5.3L - Starter - Mesa, Arizona
Great quick service vehicle now running great!

Excellent Rating

(16,565)

Rating Summary
15,544
503
119
93
306
15,544
503
119
93
306
Number of Chevrolet services completed
182215+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Do Stabilizer Bar Bushings Last?
A A stabilizer bar is pretty much exactly what it sounds like – a metal bar that helps to stabilize your car. It plays a significant role in handling, particularly around sharp turns. The bar’s job is pretty simple. It...
How to be a Successful Car Salesperson
Admit Admit it. As a car salesperson (https://www.yourmechanic.com/article/how-to-choose-your-car-salesperson-by-patrick-haas), you’ve probably been stereotyped by your customers. And while there may be a few bad salespeople out there, you know that the majority, yourself included, are hardworking and decent. Still, from the...
P0701 OBD-II Trouble Code: Transmission Control System Range/Performance
P0701 means a malfunction in the automatic control system has been detected. Issues may include transmission failure, overheating and engine stalling.

What gauges and readouts can be found in the instrument cluster?

The center of your driver side console is filled with gauges, meters and readouts that provide you with vital information about the car. Understanding the information found here will help keep you safe and secure while on the road, and...

Driver front caliper rubbing rotor

The problem is you have not seated the bearing correctly onto the hub or the hub and axle got damaged when the bearings spun on them. If you cannot tighten the bearings down after putting the tire back on, you...

Rattling noise AC heater

Hey there, thanks for writing in about your 2010 Lexus HS250h. Even though you said the blower motor looks okay, my guess is that it probably has a bad bearing, which is causing the noise. The only other thing I...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com