Chevrolet Impala Limited Car Battery Terminal Ends Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Car Battery Terminal Ends Replacement Service

How much does a Car Battery Terminal Ends Replacement cost?

On average, the cost for a Chevrolet Impala Limited Car Battery Terminal Ends Replacement is $165 with $25 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet Impala LimitedV6-3.6LService typeCar Battery Terminal Ends ReplacementEstimate$205.88Shop/Dealer Price$222.20 - $263.06
2015 Chevrolet Impala LimitedV6-3.6LService typeCar Battery Terminal Ends ReplacementEstimate$196.87Shop/Dealer Price$211.42 - $250.96
2014 Chevrolet Impala LimitedV6-3.6LService typeCar Battery Terminal Ends ReplacementEstimate$196.87Shop/Dealer Price$211.45 - $251.00
Show example Chevrolet Impala Limited Car Battery Terminal Ends Replacement prices

What is the Battery Terminal Ends all about?

Your car’s battery plays a significant role during cranking and there must be a way to get electricity from the battery to the starter and spark plugs. This is done with battery cables; there are two that connect to the battery -- one to the positive terminal and one to the negative terminal. Battery terminal ends are nothing more than clamps. They connect the cables to the terminals and hold them there securely.

Over time, battery terminal ends will corrode, particularly if you don’t have regular maintenance performed on the battery. Both the terminals and ends should be cleaned regularly to remove corrosion and build up.

If a terminal end fails, the cable will come loose from the battery. This will result in no electricity during starting. If the car isn’t already running, it will not crank. If the terminal end fails while driving, the car will continue to operate, but it will not crank again after being turned off.

Keep in mind:

  • Battery terminal ends should be inspected during all regular maintenance services.
  • Battery terminal ends should be properly maintained to prolong their life and avoid issues with corrosion.

How it's done:

  • The battery is located. The battery terminal ends are verified that they need to be replaced. The battery terminals are disconnected.
  • The defective battery terminal ends are removed by cutting the cables or unbolting the connections.
  • The battery terminals are cleaned. The new battery terminal ends are installed onto the cables and reconnected to the battery.
  • The battery terminal ends are tightened to the battery and coated with a battery protection spray.
  • The vehicle is tested for proper operation of the battery terminal ends by starting engine.

Our recommendation:

Battery terminal ends are critical components of your vehicle's charging system. They ensure that the battery stays connected to the system, providing electricity for cranking and allowing the battery to recharge while the alternator is running. Over time, corrosion can eat into the metal, eventually compromising your battery terminal ends. Have your terminal ends professionally inspected and maintained at all regular service intervals.

What common symptoms indicate you may need to replace the Battery Terminal Ends?

  • Green or white corrosion around battery terminals
  • Battery light on in dashboard
  • Vehicle will not crank

How important is this service?

Without a constant connection to the battery, your car will not crank. It won’t stop the engine from running, but it will prevent it from cranking after being turned off. Have your battery and battery cables maintained at all times, and the terminal ends replaced if damage is noticed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

Jose

6 years of experience
63 reviews
Jose
6 years of experience
Impala Limited 2016 - Spark Plugs - Palo Alto, CA
My man was prompt and was done in a timely manner.

Stacy

20 years of experience
330 reviews
Stacy
20 years of experience
Impala Limited 2014 - Brake Pads - Morrow, GA
Stacy showed up on time and was very professional

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Impala Limited 2016 - Brake Rotor/Disc - Indianapolis, IN
While I was bummed that my rotors were involved as well, Bryant busted the whole job in no time flat. I am quite happy with how everything turned out! Thank you!

John

30 years of experience
444 reviews
John
30 years of experience
Impala Limited 2014 - Wheel Bearings - Richmond, CA
Great guy would consult with him again.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of Chevrolet Impala Limited services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Fill a Windshield Wiper Fluid Reservoir
Driving Driving with a dirty windshield is not only a distraction, but it can make navigating roads difficult and dangerous as well. Dirt, grime, and mud can eventually smudge your windshield so completely that it becomes impossible to drive. Keeping...
The 10 Things to Check in a Pre-Purchase Inspection
A pre-purchase inspection will help you feel assured about a buying a used car. Check warning lights, fluids, tires, suspension, and brakes in a PPI.
How to Remove a Stuck Cylinder Head Bolt
Head bolts on the cylinder get stuck and must be removed using a breaker bar, applying impact force, or by carefully drilling the bolt out.

Vibration at low speeds in first and second

Vibrations at low speeds or when the clutch initially engages are usually caused by hot spots on the flywheel. These hot spots are hardened areas of the flywheel that are caused by heat. When the clutch tries to engage on...

What sensor affects bank 2?

Code PO302 (https://www.yourmechanic.com/article/p0302-obd-ii-trouble-code-cylinder-2-misfire-detected-by-jamahl-walker) refers to a misfire. P1153 refers to the O2 sensor not switching often enough. This sensor monitors how often a lean to rich condition or rich to lean condition is present. When there is inconsistency in this,...

I want to know if there is a way to test my [alternator](/topics-alternator-toyota/) for a bad diode as my battery drains when its off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com