Chevrolet G10 Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(35)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Chevrolet G10 Distributor Replacement is $282 with $128 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Chevrolet G10V6-4.3LService typeDistributor ReplacementEstimate$426.46Shop/Dealer Price$494.41 - $689.35
Show example Chevrolet G10 Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(35)

Rating Summary
34
0
0
0
1
34
0
0
0
1

Luis

19 years of experience
363 reviews
Luis
19 years of experience
Chevrolet G10 L6-4.1L - Starter - Elizabeth, New Jersey
Prompt, honest and friendly. Couldnt ask for more in a mechanic

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Chevrolet G10 V8-5.0L - Alternator - Charlotte, North Carolina
Install went well.

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Chevrolet S10 V6-4.3L - Distributor - Charlotte, North Carolina
WONDERFUL. Work done promptly, accurately and the price was great. Jeff has always done a super job when he comes to the house. Always on time, always willing to answer questions and share information.

Marco

12 years of experience
73 reviews
Marco
12 years of experience
Chevrolet C1500 V8-5.7L - Distributor - Fontana, California
Punctual and very professional and knowledgeable great work overall!

Excellent Rating

(35)

Rating Summary
34
0
0
0
1
34
0
0
0
1
Number of Chevrolet Distributor Replacement services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Is It Unsafe to Continue Driving a Vehicle with Broken Wheel Speed Sensors?
Car wheel speed sensors are an important safety feature. It helps the ABS system work when you need to make an emergency stop.
Is It Safe to Drive With a Broken Axle?
Without two operational axles, your car won’t be going much of anywhere. They’re what transfers power to the wheels from the transmission (in...
P3460 OBD-II Trouble Code: Cylinder 8 Deactivation/Intake Valve Malfunction
P3460 P3460 code definition The P3460 code represents what’s known as Cyl8 Deactivation/Intake Valve Ctrl Circ Low. Cyl8 narrows the issue down to engine cylinder number 8. Other codes in the P3400 series may present concurrently with P3460, indicating a...

Can an alternator be damaged when replacing the water pump?

The coolant that may have leaked from the water pump could have gotten into the alternator which could short it out. You should test the alternator and recharge the battery. You can also have a qualified mobile technician come to...

Engine steam and antifreeze leak - 1976 Mercedes Benz 450SL

Hello. This sounds like the water pump (https://www.yourmechanic.com/services/water-pump-replacement), radiator (https://www.yourmechanic.com/services/radiator-replacement), radiator hoses (https://www.yourmechanic.com/services/radiator-hose-replacement), or even one of the heater hoses (https://www.yourmechanic.com/services/heater-hoses-replacement), have started to leak. It is also possible that the gasket to the thermostat could have a leak as...

it takes a number of times to start my car it starts then stalls straightaway The car will turn over but won't fire its

Hello there. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. Some common parts that cause this include mass air flow sensors, damaged or clogged fuel injectors, or the throttle body...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com