Chevrolet Equinox Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Chevrolet Equinox Wheel Bearings Replacement is $252 with $112 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Chevrolet EquinoxV6-3.4LService typeWheel Bearings - Driver Side Front ReplacementEstimate$494.88Shop/Dealer Price$579.94 - $826.19
2017 Chevrolet EquinoxL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$1048.46Shop/Dealer Price$1255.12 - $1868.48
2015 Chevrolet EquinoxL4-2.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$546.97Shop/Dealer Price$649.07 - $951.20
2015 Chevrolet EquinoxV6-3.6LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$546.97Shop/Dealer Price$649.07 - $951.20
2010 Chevrolet EquinoxL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$960.87Shop/Dealer Price$1167.92 - $1781.58
2012 Chevrolet EquinoxV6-3.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$1048.46Shop/Dealer Price$1255.38 - $1868.94
2018 Chevrolet EquinoxL4-1.5L TurboService typeWheel Bearings - Passenger Side Front ReplacementEstimate$413.05Shop/Dealer Price$471.30 - $640.57
2014 Chevrolet EquinoxL4-2.4LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$546.97Shop/Dealer Price$649.07 - $951.20
Show example Chevrolet Equinox Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(8)

Rating Summary
7
0
0
0
1
7
0
0
0
1

Christopher

15 years of experience
286 reviews
Christopher
15 years of experience
Equinox 2011 - Wheel Bearings - Tampa, FL
That was a really professional job. So the bearing was replaced really quick and all the rust was removed from the components. I save a lot of time and money! Thanks!

Joel

9 years of experience
58 reviews
Joel
9 years of experience
Equinox 2018 - Oil Change - Carrollton, TX
Joel provided amazing service and went above and beyond expectations. Would definitely recommend!

Mario

10 years of experience
5 reviews
Mario
10 years of experience
Equinox 2015 - Tire Rotation - Lake Worth, FL
Very professional and engaging. Explained the work that he was going to do as well as future work that would need to be done. Very satisfied.

Mario

10 years of experience
5 reviews
Mario
10 years of experience
Equinox 2015 - Oil Change - Lake Worth, FL
Very professional and engaging. Explained the work that he was going to do as well as future work that would need to be done. Very satisfied.

Excellent Rating

(8)

Rating Summary
7
0
0
0
1
7
0
0
0
1
Number of Chevrolet Equinox Wheel Bearings Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0272 OBD-II Trouble Code: Cylinder 4 Contribution/Balance Fault
P0272 means that the PCM has identified that the reference voltage in cylinder #4’s fuel injector is out of range due to a faulty fuel injector.
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.
10 Best Stores to Buy Auto Parts in Portland, Oregon
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Portland is AutoZone.

What does the “Fuel level low” warning mean in the message center?

While you can easily see the fuel gauge in your car, Ford built in a couple of additional safeguards to help protect you from running out of gas on the road. It’s all too easy to overestimate how much gas...

I spray painted my chrome wheels flat black a while back and now I want the paint off! Help?

Hi there. The best stuff to use to remove paint off chrome is Rust-Oleum Aircraft Remover (a paint remover for aircraft vehicles). The remover is very powerful, so you will want to cover the paint on your vehicle with cardboard...

I changed my starter relay and tested my starter but my truck still won't crank or start it just turns everything on

Hello, thank you for writing in. The first thing we need to discuss is the testing of starters. Starters are only bench tested typically, which means they hook up a power supply and watch for it to function. What they...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com