Chevrolet Cruze Limited Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Chevrolet Cruze Limited Water Pump Replacement is $394 with $170 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet Cruze LimitedL4-1.8LService typeWater Pump ReplacementEstimate$1198.40Shop/Dealer Price$1441.76 - $2158.88
2016 Chevrolet Cruze LimitedL4-1.4L TurboService typeWater Pump ReplacementEstimate$850.69Shop/Dealer Price$942.03 - $1201.64
Show example Chevrolet Cruze Limited Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Chuy

12 years of experience
300 reviews
Chuy
12 years of experience
Cruze Limited 2016 - Door Mirror - Chicago, IL
Great mechanic, fast and efficient!

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Chevrolet Cruze Limited services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Troubleshoot a Broken Car Air Conditioner
A car air conditioner can stop working for different reasons. Inspecting your car AC yourself before having it repaired can save on cost.
P0230 OBD-II Trouble Code: Fuel Pump Primary Circuit Malfunction
P0230 P0230 code definition Fuel Pump Primary Circuit Malfunction What the P0230 code means P0230 is a generic OBD-II code which indicates that the fuel pump primary circuit has a malfunction of the vehicle power to the fuel pump when...
Understanding the Mazda Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mazda Oil Life Monitor system indicates when and what service your car needs.

Four-wheel drive encoder motor not working properly.

Hello, Since this recurring regularly the vehicle should be scanned for code. There is a good chance that the wiring to speed sensor on the transfer case has become compromised over time and the wiring harness needs to replaced. This...

Random crank but no start on a 2008 Kia Sorento

The on-board capabilities of your Kia are pretty high. When problems occur, the computer often memorizes them. A lot of times, it will turn the engine on and have the Check Engine Light on and give you a code that...

Ran the car with no oil and won't turn on

Hi, thanks for writing in. If you have ran your engine with no oil in it, it is almost a certainty that it will need to be replaced. If it is not starting now due to the no oil issue...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com