Chevrolet Corvette Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(489)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(489)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Chevrolet Corvette Headlight Bulb Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet CorvetteV8-5.7LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$208.10Shop/Dealer Price$230.38 - $276.95
1994 Chevrolet CorvetteV8-5.7LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$216.95 - $260.21
2006 Chevrolet CorvetteV8-7.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$201.63Shop/Dealer Price$220.19 - $265.40
2015 Chevrolet CorvetteV8-6.2L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$217.01 - $260.32
1995 Chevrolet CorvetteV8-5.7LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$220.69 - $266.76
2005 Chevrolet CorvetteV8-6.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$217.36 - $260.93
2009 Chevrolet CorvetteV8-6.2L TurboService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$201.63Shop/Dealer Price$220.22 - $265.47
2015 Chevrolet CorvetteV8-6.2LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$217.01 - $260.32
Show example Chevrolet Corvette Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(489)

Rating Summary
458
19
2
0
10
458
19
2
0
10

Nicholas

9 years of experience
5 reviews
Nicholas
9 years of experience
Corvette 2003 - Air Filter - Chesapeake, VA
Very polite and professional!

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Corvette 1992 - Fuel Filter - Atlanta, GA
Great job!

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
Corvette 1992 - Oil Change - Atlanta, GA
Great job!

Robert

14 years of experience
65 reviews
Robert
14 years of experience
Corvette 1990 - Intake Manifold Gaskets - Sun City West, AZ
Robert is very good. Takes his time , knows what he is doing.

Excellent Rating

(489)

Rating Summary
458
19
2
0
10
458
19
2
0
10
Number of Chevrolet Corvette services completed
5379+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Can a Loose Gas Cap Let Gas Leak Out of the Fuel Tank?
The The short answer is: yes ... kind of. What escapes out of a loose or faulty gas cap is gas vapor. Gas vapor rises off of the pool of gasoline in the tank and hangs around in the air....
How to Apply a Custom Dashboard Sticker
Sometimes Sometimes the dashboards that come with your car can appear bland and uninteresting. Customized dashboard sticker kits are a great option for you if you are looking to give your interior a temporary new style. This guide will show...
How Long Does an Air Filter Last?
Every Every internal combustion engine needs air in order to work. Without it, fuel does not burn and provide the force needed to deliver power to the engine. Additionally, the air has to be clean. Otherwise, dust and debris will...

Car struggles to start

If the car is struggling to start, the most common cause is the battery. If the battery voltage is low, not only would it cause starting issues, but it would not provide the proper voltage to all the car's traction...

Metal Shavings In Engine From Turbo

When it comes to metal shavings in the engine, you have to understand that those shavings will go everywhere. They will get between moving parts and cause further damage. They can get into the rings on the pistons and score...

What side is bank2 on a Infiniti G25 year 2012

Hi There, Bank 2 is the side of the motor on the driver's side of the car. If you need additional help with this, please feel free to reach out to us here at YourMechanic as we are always here...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com