Chevrolet Beretta Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14,853)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14,853)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Chevrolet Beretta Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Chevrolet BerettaV6-3.1LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1990 Chevrolet BerettaL4-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Chevrolet BerettaV6-3.1LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Chevrolet BerettaL4-2.2LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1987 Chevrolet BerettaV6-2.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Chevrolet BerettaL4-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1990 Chevrolet BerettaL4-2.2LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Chevrolet BerettaL4-2.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Beretta Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(14,853)

Rating Summary
13,908
470
110
83
282
13,908
470
110
83
282

Pierre

9 years of experience
309 reviews
Pierre
9 years of experience
Chevrolet Avalanche V8-5.3L - Car Battery Replacement - Waltham, Massachusetts
Outstanding

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Chevrolet Impala V6-3.5L - Variable Valve Timing (VVT) Solenoid - Jacksonville, Florida
He did a great job. I had taken my car to several mechanics and he was the first to fix the problem.

Robert

22 years of experience
283 reviews
Robert
22 years of experience
Chevrolet Traverse V6-3.6L - Headlight Bulb Replacement (Passenger Side Low Beam) - Grand Prairie, Texas
Showed up on Time, went above and beyond.

Jose

28 years of experience
14 reviews
Jose
28 years of experience
Chevrolet Suburban 1500 V8-5.3L - Pre-purchase Car Inspection - Stafford, Virginia
Excellent and thorough inspection. Great telephone and internet communication - Jose provided excellent service!

Excellent Rating

(14,853)

Rating Summary
13,908
470
110
83
282
13,908
470
110
83
282
Number of Chevrolet services completed
163383+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Cabin Air Filter
Air Air filters in your vehicle prevent dust, pollen, pollution, and other particulates from entering areas they shouldn’t, such as the engine, the fuel system, and the passenger cabin. Shopping for air filters is pretty straightforward however, there are a...
How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
P0056 OBD-II Trouble Code: HO2S Heater Control Circuit (Bank 2 Sensor 2)
P0056 P0056 trouble code definition The P0056 trouble code signifies that there is a problem with the heater control circuit in the bank 2 sensor 2 oxygen sensor. What the P0056 code means This code means that the bank 2...

Leak caused by corrosion on throttle body terminal

Hello. There are some fairly sensitive electronics inside the throttle position sensor (TPS) housing. They are also not engineered to be easily disassembled for repair either. Unless you are quite experienced at unsoldering and soldering printed circuit board connections, I...

ABS lights flashing on dash, temperature gauge increased. Multiple lights flashing on the dash. I put my seat belt on and they went away

Hello, this could be a number of things depending on how the vehicle is running now. If you possibly ran through a puddle of water or your belt is worn (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement), it could have slipped and caused the lights to...

Rear passenger wheel making crunching sound

Possible causes of such noise are wheel bearings, a stuck brake caliper or seized sliding pins on the caliper torque plate, brake dust plate interference, loose caliper or torque plate, suspension interference with the body, and trapped foreign material in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com