Cadillac CTS Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(662)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(662)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Cadillac CTS Front Crankshaft Seal Replacement is $272 with $20 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Cadillac CTSV6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$403.16Shop/Dealer Price$445.54 - $547.17
2016 Cadillac CTSV6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$321.40Shop/Dealer Price$341.83 - $390.13
2005 Cadillac CTSV6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$386.94Shop/Dealer Price$423.84 - $521.35
2015 Cadillac CTSV6-3.6L TurboService typeFront Crankshaft Seal ReplacementEstimate$302.78Shop/Dealer Price$318.63 - $353.02
2015 Cadillac CTSV6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$302.78Shop/Dealer Price$323.28 - $361.15
2004 Cadillac CTSV6-3.2LService typeFront Crankshaft Seal ReplacementEstimate$1837.53Shop/Dealer Price$2131.91 - $2975.71
2010 Cadillac CTSV6-3.6LService typeFront Crankshaft Seal ReplacementEstimate$386.94Shop/Dealer Price$423.88 - $521.43
2007 Cadillac CTSV6-2.8LService typeFront Crankshaft Seal ReplacementEstimate$386.94Shop/Dealer Price$423.83 - $521.34
Show example Cadillac CTS Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(662)

Rating Summary
630
17
4
4
7
630
17
4
4
7

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Cadillac CTS V6-3.6L - Oil Change - Houston, Texas
Breck is a true and knowledgeable professional and the service I received was awesome.

Simon

8 years of experience
23 reviews
Simon
8 years of experience
Cadillac CTS V6-3.6L - Alternator - Troy, Michigan
Simon was Awesome! He showed up a few minutes early and knew exactly what he was doing. The repair was done perfectly and I'm back on the road! Would definitely use him again.

Toby

11 years of experience
100 reviews
Toby
11 years of experience
Cadillac CTS V6-3.2L - Oil/Fluid Leak - Fort Worth, Texas
Toby was great! Very knowledgeable and goes above and beyond. He's also very honest. If there were 10 stars I would give him all 10s

Bacle

18 years of experience
60 reviews
Bacle
18 years of experience
Cadillac CTS V6-3.6L - Ignition Coil - San Jose, California
Very professional and did a great job with my car. Provided great feedback on my vehicle issues and even came back to my work site when I thought I had problem from his original fix.

Excellent Rating

(662)

Rating Summary
630
17
4
4
7
630
17
4
4
7
Number of Cadillac CTS services completed
7282+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P0864 OBD-II Trouble Code: Traction Control Module (TCM) Communication Circuit Range/Performance
P0864 means there is an issue with the communication circuit in the traction control module, likely due to a defective ON/OFF switch or module itself.
P3411 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit Low
P3411 means the system detected a problem with vehicle sensors due to electrical problems, bad solenoids, low oil pressure, or mechanical issues.
10 Best Stores to Buy Auto Parts in Portland, Oregon
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Portland is AutoZone.

TPMS light is on

In Hyundai vehicles you need to have a special scanner to reset the tire pressure monitor system when a sensor is replaced. The scan tool will wake up each sensor and record its serial number. After you have each tire...

Check Engine Light is on and I am getting codes P2600, P22aa, and P24aa

Hello. The codes you have provided are related to the engine and emissions systems. P2600 (https://www.yourmechanic.com/article/p2600-obd-ii-trouble-code-coolant-pump-control-circuit-open-by-brady-klopfer) appears to be related to an issue with the engine's coolant pump circuit. This model of vehicle uses an electric water pump. The computer...

Takes off in 2nd gear and will not shift

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com