Buick Encore Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(116)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(116)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Buick Encore Wheel Bearings Replacement is $235 with $53 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$428.50Shop/Dealer Price$489.93 - $663.69
2017 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$499.55Shop/Dealer Price$579.37 - $813.48
2018 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$294.97Shop/Dealer Price$323.68 - $404.38
2014 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$416.79Shop/Dealer Price$475.95 - $648.01
2016 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$499.55Shop/Dealer Price$581.32 - $816.89
2017 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$499.55Shop/Dealer Price$579.58 - $813.85
2014 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Driver Side Rear ReplacementEstimate$416.79Shop/Dealer Price$475.97 - $648.05
2018 Buick EncoreL4-1.4L TurboService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$294.97Shop/Dealer Price$323.68 - $404.37
Show example Buick Encore Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(116)

Rating Summary
107
4
1
0
4
107
4
1
0
4

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Buick Encore L4-1.4L Turbo - Oil Change - Tampa, Florida
Fantastic very nice and polite. He services all of our cars.

Luke

18 years of experience
322 reviews
Luke
18 years of experience
Buick Encore L4-1.4L Turbo - Car is making a noise - Manor, Texas
Friendly, Professional, Competent, Knowledgeable

Adam

18 years of experience
263 reviews
Adam
18 years of experience
Buick Encore L4-1.4L Turbo - AC is not working - Boynton Beach, Florida
Explained everything so that a person like me who know nothing about cars except how to drive and put gasoline in the tank, easier understood what was found and what it meant. Would not hesitate to ask for Adam again or recommend him for anyone else.

Yoel

10 years of experience
212 reviews
Yoel
10 years of experience
Buick Encore L4-1.4L Turbo - AC is not working - Philadelphia, Pennsylvania
Yoel was early and completed the job extremely quickly and efficiently. He informed me of where the problem was and explained the process. Will definitely call again if I need him.

Excellent Rating

(116)

Rating Summary
107
4
1
0
4
107
4
1
0
4
Number of Buick Encore services completed
1276+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

Michigan Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Michigan. Speed limits in Michigan 70 mph: many areas of urban and rural freeways and interstates (60 mph...
How to Know if You're Old Enough to Rent a Car
There There are many circumstances in life when you need transportation but don’t own a vehicle. Some of these situations include: You need to get around while you’re traveling away from home You need a reliable vehicle for a road...
How to Get $10 Off YourMechanic.com
Get $10 off YourMechanic services and share $10 coupons with friends with our Give $10, Get $10 Refer-a-Friend program.

How do I turn on the rear view camera?

The rear view camera provides excellent visibility when you are reversing your vehicle. This system operates with a camera above your license plate, which displays an image on your display. The rear view camera will automatically turn on when the...

How often to change oil and oil filter?

In today's vehicles, the majority of cars are able to go between 5,000-6,000 miles between oil changes (https://www.yourmechanic.com/article/when-should-i-change-my-oil) depending on the health of the car's engine and assuming you are using a quality oil. For some, this is a matter...

I am thinking of buying a 98 Lexus LS400 with 200,000 mi for $3000. IT runs great and is in beautiful condition. Check Engine light is on 1998 Lexus LS400

Hello - as to the starter question, if the starter starts to spin immediately after you turn the key to the "Start" position, spins the motor over briskly without strange noises, hot or cold - the starter is probably fine....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com