BMW M550i xDrive Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(62)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(62)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a BMW M550i xDrive Control Arm Assembly Replacement is $661 with $493 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1172.10Shop/Dealer Price$1422.95 - $2165.76
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1161.29Shop/Dealer Price$1410.01 - $2151.24
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1321.88Shop/Dealer Price$1572.68 - $2315.46
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1161.29Shop/Dealer Price$1410.04 - $2151.29
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1161.29Shop/Dealer Price$1411.81 - $2154.38
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1321.88Shop/Dealer Price$1573.00 - $2316.02
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1161.29Shop/Dealer Price$1410.06 - $2151.32
2018 BMW M550i xDriveV8-4.4L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1161.29Shop/Dealer Price$1410.04 - $2151.29
Show example BMW M550i xDrive Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(62)

Rating Summary
58
3
0
0
1
58
3
0
0
1

Diego

22 years of experience
564 reviews
Diego
22 years of experience
BMW X5 L6-3.0L Turbo Diesel - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Phoenix, Arizona
He is extremely thorough...

Robert

32 years of experience
646 reviews
Robert
32 years of experience
BMW 318ti L4-1.9L - Control Arm Assembly Replacement (Rear Lower Left) - Los Gatos, California
Great mechanic

Nathan

30 years of experience
260 reviews
Nathan
30 years of experience
BMW 325i L6-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Tulsa, Oklahoma
Good experience

Petar

8 years of experience
21 reviews
Petar
8 years of experience
BMW 540i V8-4.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Auburn, Washington
Petar had some challenges with parts that were seized within my suspension. He was able to come up with ideas to work through those issues within my vehicles components. After realizing he needed more time to work out the issues, he made adjustments to his schedule toward a better repair outcome. I deeply appreciate his reliability, advice, and commitment to complete the task. Great job Petar!

Excellent Rating

(62)

Rating Summary
58
3
0
0
1
58
3
0
0
1
Number of BMW Control Arm Assembly Replacement services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

What are the Car Pool Lane Rules in Mississippi?
While While car pool lanes used to be relatively sparse, they’ve quickly gained popularity across the nation. There are thousands of miles of car pool lanes in the United States, and such lanes can be found in most of the...
P0806 OBD-II Trouble Code: Clutch Position Sensor Circuit Range/Performance Malfunction
P0806 code means there is an issue with the clutch position sensor (manual) or a problem with the PCM in an automatic, often due too damaged wiring.
How to Transfer a Car Title in Connecticut
The The proof of who owns a vehicle lies in the car’s title – whoever’s name is on the title owns the car. Obviously, that means that if you decide to sell your car, or buy a car from a...

New battery dead from trying to start car.

This engine had quite a few different issues that may of caused a no start. The list is ignition module, distributor stator, fuel pump, fuel pump relay, timing belt, ignition coil and wiring issues. The only way to fide the...

My temperature gauge is fluctuating and my car is not putting out heat anymore, I tried putting coolant in it and there are no leaks.

Hi there. Check the coolant temperature sensor and see if it has a loose connection on the wiring harness. This will cause the gauge to fluctuate up and down as the engine is running. For the heater not working, check...

what is the firing order

Hello. The firing order of your car is 1-3-4-2.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com