BMW ActiveHybrid 7 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a BMW ActiveHybrid 7 Fuel Injector Replacement is $1353 with $863 for parts and $490 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeFuel Injector ReplacementEstimate$2268.06Shop/Dealer Price$2721.50 - $4032.21
2013 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeFuel Injector ReplacementEstimate$4167.33Shop/Dealer Price$5092.65 - $7843.34
2015 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeFuel Injector ReplacementEstimate$2236.53Shop/Dealer Price$2679.30 - $3982.01
Show example BMW ActiveHybrid 7 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0

Fred

18 years of experience
389 reviews
Fred
18 years of experience
BMW 328i L6-3.0L - Fuel Injector - Houston, Texas
I needed my fuel injector to be replaced. Fred was very knowledgeable and fast with repairs. I would definitely recommend him for repair services. Thanks, again!

Mario

16 years of experience
5 reviews
Mario
16 years of experience
BMW 330i L6-3.0L - Fuel Injector - Irvington, New York
Very polite, courteous, and helpful mechanic. Well qualified and knew how to do his job and give meaningful diagnosis and recommendations.

Jonathan

12 years of experience
37 reviews
Jonathan
12 years of experience
BMW 328i xDrive L6-3.0L - Fuel Injector - Land O' Lakes, Florida
Jonathan was friendly and knowledgeable. I would highly recommend.

Robert

18 years of experience
71 reviews
Robert
18 years of experience
BMW 330xi L6-3.0L - Fuel Injector - Roswell, Georgia
Robert showed up on time, was very prompt in his diagnosis of what needed to be replaced via notes from the previous mechanic. He promptly got to work and fixed the problem within the allotted time frame. He was in and out and very friendly and knowledgeable about what needed to be done.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0
Number of BMW Fuel Injector Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Find the Keyless Code on a Ford Explorer or Mercury Mountaineer
Many Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: Eliminate fumbling...
Is It Safe to Drive With the DEF Light On?
A tractor trailer at the side of the road ideally means that the driver has pulled over for a well-earned nap. Of course...
How Long Does an Electronic Brake Control Module (EBCM) Last?
Technology Technology has come a long way where cars are concerned, and the braking system is one area that has really benefitted from advances. There are now all kinds of safety features that are built into the braking system that...

Clunking noise from the rear passenger side when going over uneven roads or bumps.

Hi there. It appears you've done a pretty good job of diagnosing a possible problem with either your rear strut or rear stabilizer bar. It's common for struts and stabilizer bar bushings to wear out first among suspension components (especially...

My engine won't turn just a single click or knock when I turn the key

If the starter motor is not even cranking the engine, among the first possibilities is a weak battery, excessive voltage drop in the starter circuit due to poor electrical connections, or a dead starter/solenoid. Prior to performing diagnostics the battery...

My car is making a clicking noise when I take my foot off the accelerator

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com