BMW 760i Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a BMW 760i Power Steering Pump Replacement is $1946 with $1610 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 BMW 760iV12-6.0LService typePower Steering Pump ReplacementEstimate$3591.44Shop/Dealer Price$4411.42 - $6837.34
2004 BMW 760iV12-6.0LService typePower Steering Pump ReplacementEstimate$3569.82Shop/Dealer Price$4382.38 - $6802.73
2005 BMW 760iV12-6.0LService typePower Steering Pump ReplacementEstimate$3569.82Shop/Dealer Price$4382.48 - $6802.92
Show example BMW 760i Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(24)

Rating Summary
22
0
0
2
0
22
0
0
2
0

Tung

17 years of experience
310 reviews
Tung
17 years of experience
BMW 760i V12-6.0L - Car is leaning to one side Inspection - Atlanta, Georgia
Tung was wonderful.

Travis

14 years of experience
691 reviews
Travis
14 years of experience
BMW 330i L6-3.0L - Power Steering Pump - South Saint Paul, Minnesota
Really Really good service It was a pleasure to work with Travis, professional, honest, and explained everything that he repaired. I will always come to your service first for repairs in the future. Thank you

Simon

31 years of experience
109 reviews
Simon
31 years of experience
BMW X3 L6-3.0L - Power Steering Pump - Rio Rancho, New Mexico
Professionalism at its best! Excellent! Will recommend...

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
BMW 328i L6-3.0L - Power Steering Pump - Seattle, Washington
Excellent service, on time and below budget.

Excellent Rating

(24)

Rating Summary
22
0
0
2
0
22
0
0
2
0
Number of BMW Power Steering Pump Replacement services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Purchase an Austin Healey
The Austin Healey is a small British roadster that has a very large following among collectors. The cars are made up of just a handful of parts, and are a great choice for those just venturing into the world of...
P0723 OBD-II Trouble Code: Output Speed Sensor Malfunction
P0723 P0723 code definition The P0723 fault code is representative of the condition known as Output Speed Sensor Intermittent. Similar related codes include P0720, P0721, and P0722, which may all indicate a problem with the OSS (output speed sensor) or...
Can a Car Battery Freeze?
Cold temperatures can make it hard to start your car, and extreme cold can freeze a battery. Use a battery heater to make your car reliable in winter.

Car makes a single loud pop when first backing up or pulling foward. Sounds like s hammer.

You should have the lower control arm ball joints checked (https://www.yourmechanic.com/article/how-to-check-suspension-ball-joints-by-ed-ruelas) to see if they are loose. Also, check the sway bar link arms and sway bar bushings for wear or damage. An inspection of your suspension system (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) by...

Interchangeable parts

I believe you can as long as the brackets are the same. If you want to make sure you have the same brackets before you unhook your seat. You should be able to check under the seats and measure them....

Im getting 2 codes p1132 and p1152 why would they be on and why does my suv have trouble running when the engine is cold

Codes p1132 and P1152 have to do with the oxygen sensor circuits. The engine control unit relies on the oxygen sensors - along with many others - to read the air/fuel content of the exhaust. By measuring the air/fuel content...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com