BMW 325xi Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(70)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(70)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a BMW 325xi Hazard / Turn Signal Flasher Replacement is $118 with $23 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 BMW 325xiL6-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$160.97Shop/Dealer Price$189.97 - $237.58
2006 BMW 325xiL6-3.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
2005 BMW 325xiL6-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$140.97Shop/Dealer Price$170.00 - $217.63
2001 BMW 325xiL6-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.31 - $518.92
2004 BMW 325xiL6-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$140.97Shop/Dealer Price$170.02 - $217.68
2002 BMW 325xiL6-2.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$291.65Shop/Dealer Price$358.35 - $518.99
Show example BMW 325xi Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(70)

Rating Summary
62
3
1
0
4
62
3
1
0
4

Vladimir

10 years of experience
214 reviews
Vladimir
10 years of experience
BMW 325xi L6-3.0L - Battery - Roseville, California
Excellent service and came early...

Travis

15 years of experience
165 reviews
Travis
15 years of experience
BMW 325xi L6-2.5L - Coolant is leaking - Wylie, Texas
Very good at what he does

H

26 years of experience
828 reviews
H
26 years of experience
BMW 325xi L6-2.5L - Oil Change - Palo Alto, California

John

20 years of experience
568 reviews
John
20 years of experience
BMW 325xi L6-2.5L - Alternator - Winter Garden, Florida
He was awesome!!!

Excellent Rating

(70)

Rating Summary
62
3
1
0
4
62
3
1
0
4
Number of BMW 325xi services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy Good Quality Tire Snow Socks
When When the white stuff starts to fall, you need to take action. For many drivers, installing winter tires is the right choice. For others, using tire chains is better. However, you might actually benefit from something else – tire...
Is it Safe to Drive With a Mattress On Your Roof?
If If you bought a mattress at the local mattress store, you may be wondering how to transport it home. While some stores offer delivery, others do not. Tying a mattress to the roof of your car is an option,...
P0248 OBD-II Trouble Code: Turbocharger Wastegate Solenoid B Range/Performance
P0248 code means the solenoid is not controlling wastegate activity in the intended manner due to a faulty solenoid, wiring, or a stuck wastegate door

Clutch not working properly.

This sounds like you have a busted clutch (https://www.yourmechanic.com/services/clutch-is-not-working-inspection) or transmission along with your axles being broken. The broken axles may be an indication that the transmission input shaft or clutch is broken. The engine oil cooler would have to...

Replace the front wheel bearings. Can I remove the bearing assembly without having to detach the lower ball joint?

The wheel hub assembly can come off with taking off the three bolts that secure it to the knuckle on the vehicle. You do not need to remove the lower ball joint to remove the wheel hub assembly. If you...

Ha an alignment.. 04 pt cruiser still pulls to the right hard

If the alignment has not enough positive caster it will not return to center as it should or if you have a binding rack and pinion or tie rod ends it will also cause the same problem. If alignment is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com