BMW 228i xDrive Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a BMW 228i xDrive Fuel Pump Replacement is $918 with $652 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 BMW 228i xDriveL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1598.42Shop/Dealer Price$1936.37 - $2923.29
2016 BMW 228i xDriveL4-2.0L TurboService typeFuel Pump ReplacementEstimate$1581.30Shop/Dealer Price$1913.38 - $2895.89
Show example BMW 228i xDrive Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(33)

Rating Summary
32
0
0
0
1
32
0
0
0
1

Damian

12 years of experience
465 reviews
Damian
12 years of experience
BMW 228i xDrive L4-2.0L Turbo - Oil Change - Kensington, Maryland
Damian showed up early to my appointment. He was courteous and friendly.

Jimmi

28 years of experience
343 reviews
Jimmi
28 years of experience
BMW 228i xDrive L4-2.0L Turbo - Brake Rotor/Disc Replacement (Rear) - Sanford, Florida
I will only work with Jimmi. Honest mechanic and quality work.

Behrak

10 years of experience
403 reviews
Behrak
10 years of experience
BMW 228i xDrive L4-2.0L Turbo - Oil Change - Duluth, Georgia
Great first experience - will definitely use again!

Charles

18 years of experience
176 reviews
Charles
18 years of experience
BMW 528i L6-2.8L - Fuel Pump - Washington, District of Columbia
Charles does great work and is very kind. He arrives on time and does the job in a timely manner. I will surely ask for Charles to repair any future repairs needed on my vehicle.

Excellent Rating

(33)

Rating Summary
32
0
0
0
1
32
0
0
0
1
Number of BMW Fuel Pump Replacement services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How Long Does a Transmission Position Sensor (Switch) Last?
All All automatic transmission vehicles have a safety switch in place that only allows them to start if they are in park or neutral gars. The transmission position sensor, also called the transmission position switch, ensures the vehicle is in...
Acura Certified Pre-Owned (CPO) Car Program
Drivers Drivers in the market for a used Acura vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to learn...
How to Renew Your Car Registration in Wyoming
The The state of Wyoming requires that all vehicles be registered once per year. Failure to do so means that your car will not be legal to drive on the roads. Proceeds from the renewal fees go to maintaining the...

Vibration at low speeds in first and second

Vibrations at low speeds or when the clutch initially engages are usually caused by hot spots on the flywheel. These hot spots are hardened areas of the flywheel that are caused by heat. When the clutch tries to engage on...

Where is the relay flasher located in the 2002 Hyundai XG350

Hello -both the flasher unit (https://www.yourmechanic.com/article/how-to-replace-a-turn-signal-hazard-flasher-by-jessica-howe) and the relay for it are close to each other, and under the dash just left of the steering column. The knee crash pad will need to be removed to make it easier to...

Jack

Hi Patel. Thanks for the question today. Unfortunately, we can't attach images to this platform. However, you can watch this video which is a 2004 Honda Odyssey (https://www.youtube.com/watch?v=jfaoBc1DrsM) (with similar jack points in 2010) to learn the safe places to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com