Audi V8 Quattro Lights (Headlamps/beams/brakes) Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,399)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,399)

Lights (Headlamps/beams/brakes) Inspection Service

How much does a Lights (Headlamps/beams/brakes) Inspection cost?

On average, the cost for a Audi V8 Quattro Lights (Headlamps/beams/brakes) Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Audi V8 QuattroV8-4.2LService typeLights (Headlamps/beams/brakes) InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1991 Audi V8 QuattroV8-3.6LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1990 Audi V8 QuattroV8-3.6LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1993 Audi V8 QuattroV8-4.2LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1994 Audi V8 QuattroV8-4.2LService typeLights (Headlamps/beams/brakes) InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
Show example Audi V8 Quattro Lights (Headlamps/beams/brakes) Inspection prices

The headlights and brake lights on a vehicle are absolutely essential for safe driving and in many cases it is illegal to drive if they are not functioning correctly. Problems with the light system can range from a simple blown bulb to something more complicated like a faulty socket.

Regardless of the reason, lights that are not functioning can lead to dangerous driving conditions, so the lighting system should be inspected and repaired as soon as possible.

How this system works:

Headlights

There are a number of different types of headlight systems but they all do the same thing: light up the road in front of the vehicle.

In a common halogen system, the headlight housing is where the headlight bulb sits. The inside of the housing is covered with chrome paint that reflects the light down the road. The chrome piece that coves the actual bulb is there to prevent the bulb from blinding oncoming drivers. They are powered by the vehicles electrical system. They can be toggled between a high and low beam. These systems use a halogen bulb.

Brake Lights

Brake lights illuminate when the contacts in the stop light switched are closed. When a driver steps on the brake pedal, this closes the switch, which sends power to the bulbs, which lights up the bulbs.

Common reasons for this to happen:

Brake Lights

  • Blown Fuse: The electrical power for the brake light system passes through a fuse and if the fuse blows, the brake lights will no longer work. While this is usually a simple fix, it could indicate a larger problem. If the same fuses continue to blow, the brake light system should be inspected.

  • Burned Out Bulb: Like any light bulb, vehicle bulbs will burn out over time. At some point in the lifespan of a vehicle the brake light bulbs will have to be replaced. Time frames differ depending on the bulb type. In most states driving with a burned out brake light is illegal.

  • Malfunctioning Brake Light Switch: The brake light switch works like a household light switch. When the brake pedal is depressed it opens the switch to send electricity to the brake lights. If the switch is bad it breaks the connection between the brake lights and the pedal. The brake lights will no longer work, or they can become stuck in the on position.

  • Issue with Bulb Socket: The sockets that the brake light bulbs sit in can be dirty. If the debris builds up on the contacts in the socket it will prevent the bulb from making contacting and it will not light up. In this situation, only one brake light will not be working, it is uncommon for both sockets to become blocked at the same time.

Unplugged Harness: The electrical system that runs the brake light system contains various harness and if one of them becomes unplugged or defective it will affect the brake lights.

Headlights

  • Bad Bulb: Just like the brake lights and every other bulb, eventually the headlights will burn out and need to be replaced. Bulb life varies depending on what type of bulb the vehicle uses. In most cases, if only one headlight is not working, replacing the bulb should be the first step.

  • Blown Fuse: Just like the brake lights, the electrical system that runs the headlights incorporates fuses and if one of them is blown the headlights will not work. If you cannot switch between high and low beams, a fuse could very well be the problem.

  • Bad Relay: If both headlights are not working, the headlight relay is one of the most common causes. The headlight relay is part of the electrical system and if it is malfunctioning, the lights will not get power. The relay will have to be replaced.

  • Bad Headlight Switch: The headlight switch is used to turn on the lights. If the switch is malfunctioning the headlights will not function. If it is impossible to turn the headlights on the car should not be driven at night and should be repaired immediately.

  • Faulty Socket: The socket that the headlight bulb sits in can become dirty or contaminated. If this happens the bulb cannot make the contact it needs to light. In this case, the most common symptom would be one headlight not working.

  • Moisture in Headlight: If the headlights turn on but are not illuminating the road there could be moisture in the in the housing. This will cause fogging and diminished performance of the headlights.

  • Bad Dimmer Switch: The dimmer switch allows the driver to switch between high and low beams. If the switch is malfunctioning the headlights can become stuck on high or low. Headlights stuck on high could be dangerous for on-coming drivers and the problem should be fixed as soon as possible.

What to expect:

A top­-rated mobile mechanic will come to your home or office to determine the source and cause of the headlight or brake light issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

The lights are a major safety component of the vehicle and they should be maintained to ensure safe driving conditions. Malfunctioning lights should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57

Stephen

32 years of experience
179 reviews
Stephen
32 years of experience
Audi Q7 V6-3.6L - Lights (Headlamps/beams/brakes) Inspection - Broomfield, Colorado
Very personable and professional would definitely use again

John

19 years of experience
138 reviews
John
19 years of experience
Audi TT L4-2.0L Turbo - Lights (Headlamps/beams/brakes) - Austin, Texas
Awesome. Informative and approachable.

Danny

20 years of experience
32 reviews
Danny
20 years of experience
Audi A4 Quattro L4-2.0L Turbo - Pre-purchase Car Inspection - Seabrook, New Hampshire
I needed a reliable mechanic to check out a car for purchase in another state - Danny delivered. He found all the flaws and gave me a solid picture of what I was buying. Highly recommended!

Matt

15 years of experience
111 reviews
Matt
15 years of experience
Audi A3 L4-1.8L Turbo - Brake Pads Replacement (Rear) - Tempe, Arizona
Matt is incredibly experienced and knowledgeable and can handle any expected and unexpected issue with grace and solve it. What sets Matt apart is his character. He truly loves working in the industry and wants to be able to help you understand your car. Matt might even be putting himself out of business because he will literally have you do your own work while he supervises and teaches you. Best mechanic. Period.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57
Number of Audi services completed
26389+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Know When to Replace Car Tires
Car tires get worn out after miles on the road. Inspect tires for damage and check tread depth with a coin to make sure car tires are in good shape.
P001D OBD-II Trouble Code: “A” Camshaft Profile Control Circuit/Open
P001D P001D code definition “A” Camshaft Profile Control Circuit/Open What the P001D code means This diagnostic trouble code is an indication that the crankshaft and camshaft signals are out of time by some measure. When this happens the Power Control...
Why Brake Caliper Replacements Can Be Tricky
Changing a brake caliper in the front or rear of a car can pose some challenges, as the proper tools and equipment are essential to perform the job.

I just bought a 2014 Hyundai elantra and the oil pressure light flickers on and off only sometimes .Its Like in a blink of an eye

Excepting an extremely low oil level, oil pressure is not a function of whether the oil level is high or low. If the light is coming on, engine oil pressure may simply be below the minimum pressure requirement at idle....

When replacing a water pump do you use thw gasket it comes with and gasket sealer

Yes you should use a good anaerobic sealer with the paper gasket applied to water pump and engine to hold and seal gasket.

2005 Ford Escape v6. A/c compressor was bad (took apart and noticed the bearing were failing). So I replaced compressor with brand new one. Added 4oz of oil and also added new refrigerant. But now I can not get the clutch to engage nor the radiator fans. I have checked fuses and also replaced 3 relays just to be sure that was not it. [Engine](/topics-engine-ford/) starts to smoke some. Before this situation there was a Freon leak somewhere (i was assuming the bad compressor). And the heat stopped working properly about a year again. I drained the [coolant](/topics-coolant-ford/) and tried flushing the system. Not much came out and still no good amount of heat unless the car was accelerating. My next step was to replace the [thermostat](/topics-thermostat-ford/) switch, but was curious if I may be missing something else?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com