Audi allroad Power Steering Pump Pulley Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Power Steering Pump Pulley Replacement Service

How much does a Power Steering Pump Pulley Replacement cost?

On average, the cost for a Audi allroad Power Steering Pump Pulley Replacement is $214 with $119 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Audi allroadL4-2.0L TurboService typePower Steering Pump Pulley ReplacementEstimate$353.95Shop/Dealer Price$431.19 - $623.54
2016 Audi allroadL4-2.0L TurboService typePower Steering Pump Pulley ReplacementEstimate$333.95Shop/Dealer Price$411.22 - $603.59
2013 Audi allroadL4-2.0L TurboService typePower Steering Pump Pulley ReplacementEstimate$333.95Shop/Dealer Price$411.22 - $603.59
2015 Audi allroadL4-2.0L TurboService typePower Steering Pump Pulley ReplacementEstimate$333.95Shop/Dealer Price$411.18 - $603.52
Show example Audi allroad Power Steering Pump Pulley Replacement prices

What is the Power Steering Pump Pulley all about?

Like many other systems on your vehicle, your power steering operates on pressurized fluid, and the power for pressurizing that fluid is delivered by the engine. Depending on the year, make and model, your car may have a single drive belt, or two belts. In both situations, a belt will operate the power steering pump via a pulley. The belt runs around the pulley, and spins it while the engine operates. When the engine is off, the pulley remains still and the pump does not work.

As with any other pulley in the engine, the power steering pump pulley relies on a bearing to ensure that it operates correctly. Heat and friction will wear the bearings out and they will eventually need to be replaced. There are other instances that could cause problems with the power steering pump pulley, including serious auto accidents that bend or even break the pulley.

Keep in mind:

  • Power steering pump pulley and belt operation should be checked at regular maintenance (oil changes).
  • Bearing failure is the most common power steering pump pulley problem.
  • A broken belt can cause your power steering system to malfunction.
  • The belt can brake if bearings seize.

How it's done:

  • The hood is opened and the serpentine belt is removed
  • The power steering pulley is removed with a pulley puller
  • The new power steering pulley is installed using a pulley installer
  • The serpentine belt is installed and pulley alignment is checked
  • The engine is run and the power steering system operation is checked

Our recommendation:

Without an operational power steering pump pulley, your entire power steering system will be inoperable. The most common cause of problems here is wear and tear to the pulley bearing. The pulley will need to be removed, the old bearing pulled out, and a new bearing installed. Because of the importance of this system, we recommend having any power steering system problems be diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Power Steering Pump Pulley?

  • Whining or grinding sound while engine is running
  • Power steering pump pulley is locked (won’t turn)
  • Power steering or serpentine belt is broken (possibly a sign of bearing failure)

How important is this service?

Some power steering systems aren’t as critical as others, but this one plays an important role in the drivability of your vehicle. If you notice any of the symptoms above, or suspect there’s a problem with the pulley or the bearing, you should have the system inspected immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Rear) - San Pedro, California
Excellent service on my car.

Lucas

21 years of experience
893 reviews
Lucas
21 years of experience
Audi allroad L4-2.0L Turbo - Oil Change - Woodland Hills, California
Very good and informative. He did miss the appointment time but delivered a fair explanation for the delay.

Nestor

8 years of experience
26 reviews
Nestor
8 years of experience
Audi allroad L4-2.0L Turbo - Oil Change - Eagle, Idaho
This was a very positive experience for me.

Corey

16 years of experience
11 reviews
Corey
16 years of experience
Audi allroad L4-2.0L Turbo - Brake System Flush - Portland, Oregon
Great experience, arrived in time and completed the job with care and attention to detail. Highly recommended

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Audi allroad services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Jaguar XJ
While While Jaguar has struggled in the past with breaking out into a more modern consumer base, the XJ does a good job of helping the carmaker to shed its stodgy, old-fashioned rep and enter the full-size luxury sedan market...
Disabled Driver Laws and Permits in New York
In In New York State, disability license plates and placards are available to people who are either permanently or temporarily disabled. You can get disabled plates for permanent or temporary disabilities. Either way, you will have to provide proof from...
How to Replace a License Plate Bulb
The license plate lamps are designed to illuminate the plate and registration tags on your vehicle and make it easily visible to...

3.7 engine temperature gauge runs between middle to 3/4, leans a little more to 3 /4 never over is this normal

Hi there, thanks for writing in about your 2007 Hummer H3. The temperature should typically rest more towards the middle of the gauge. You should have the vehicle tested to see if the engine is running hot, or if it...

New rear disc rotor/Hub/Parking Brake

Hi there: In general, there are a few things that can cause the brake rotor (https://www.yourmechanic.com/article/how-long-does-a-brake-rotor-disc-last) and wheel to not spin freely after installing a new rotor. The first and most common is that the center hub is dirty, rusted...

The code I get for the O2 sensor reads Bank 2 is that the upper or lower sensor and where on the engine is that located? 2008 Kia Rondo

Hello - Bank 2 (https://www.yourmechanic.com/question/hello-i-have-to-replace-both-the-bank-1-and-bank-2-cat-does-bank-1-and-2-refer-to-right-and-left-thanks-by-jarod-gis) the cylinder group (or "Bank") that does NOT contain cylinder #1. (Conversely, Bank 1 is the group of cylinders or "bank" of the engine that contains cylinder #1) On your engine, Bank 2 would be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com