Audi allroad Air Bleed Housing Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Air Bleed Housing Assembly Replacement Service

How much does a Air Bleed Housing Assembly Replacement cost?

On average, the cost for a Audi allroad Air Bleed Housing Assembly Replacement is $605 with $206 for parts and $399 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Audi allroadL4-2.0L TurboService typeAir Bleed Housing Assembly ReplacementEstimate$895.60Shop/Dealer Price$1072.27 - $1436.88
Show example Audi allroad Air Bleed Housing Assembly Replacement prices

What is the Air Bleed Housing Assembly all about?

Coolant is essential to engine operation throughout the year. It carries away heat that would otherwise kill the engine during operation, but it also protects against freezing during winter – normal water can freeze solid inside an engine, causing immense damage from expansion. However, coolant degrades over time and must be changed. Changing the coolant allows air into the system, which must be removed in order for the engine to operate correctly. Air in the coolant lines can cause many problems, including overheating and severe engine damage.

The air bleed housing assembly, or air bleeder housing assembly if you prefer, is a simple setup generally found near the back of the engine that allows you to combat this problem. It is usually the highest point on the cooling system. It’s nothing more than a small housing with a bleeder nut attached. By opening the valve while the engine is running after a coolant change, air escapes out of the system and prevents overheating.

Keep in mind:

  • The air bleed housing assembly is not inspected during normal maintenance, but should be inspected during any coolant system service.
  • The air bleed housing assembly is made of metal, and running straight water in your system can cause problems including rust and corrosion that will require the assembly to be replaced.

How it's done:

  • The air bleed housing assembly is verified to see if it needs to be replaced
  • The defective air bleed housing assembly is removed
  • The new air bleed housing assembly is installed
  • The air bleed housing assembly is tested for operation and leaks
  • The vehicle is tested to ensure proper operation of the air bleed housing assembly

Our recommendation:

The air bleed housing assembly on your car’s coolant system is crucial after a coolant system change. If air is not removed from the lines, the engine could overheat from an airlock, causing damage as serious as a cracked block in extreme situations. Have the air bleeder housing assembly replaced by one of our expert mechanics if it is corroded or inoperable.

What common symptoms indicate you may need to replace the Air Bleed Housing Assembly?

  • Bleeder valve will not open
  • Bleeder valve or assembly is damaged in some way that compromises operation
  • The housing is leaking coolant.

How important is this service?

While the air bleed housing assembly isn’t critical to normal operation, it’s a crucial part of your engine coolant system. If the bleeder valve is damaged, or the assembly is corroded, we recommend replacing it as soon as possible. It will not prevent you from driving your car, but it can cause serious issues after a coolant change.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0

Corey

16 years of experience
11 reviews
Corey
16 years of experience
Audi allroad L4-2.0L Turbo - Brake System Flush - Portland, Oregon
Great experience, arrived in time and completed the job with care and attention to detail. Highly recommended

Ruben

14 years of experience
86 reviews
Ruben
14 years of experience
Audi allroad L4-2.0L Turbo - Brake Rotor/Disc Replacement (Front) - Los Angeles, California
Best Mechanic and repair experience that I have ever had! Thank you Ruben!

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Audi allroad L4-2.0L Turbo - Brake Pads Replacement (Rear) - San Pedro, California
Excellent service on my car.

Lucas

21 years of experience
893 reviews
Lucas
21 years of experience
Audi allroad L4-2.0L Turbo - Squealing noise from brakes - Santa Monica, California
Lucas was very knowledgeable and patient in investigating the problem and explaining and following up on the situation. Another great YOur Mechanic experience!

Excellent Rating

(11)

Rating Summary
11
0
0
0
0
11
0
0
0
0
Number of Audi allroad services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

What Steps Must I Take Before Buying a Used Car?
Buying Buying a used car can feel like a very scary situation when it's your first time doing so. There are so many options and sometimes people can be impulsive and end up getting a vehicle that doesn't suit them....
P0068 OBD-II Trouble Code: Air Assisted Injector Control Circuit High
P0068 P0068 trouble code definition Manifold Absolute Pressure or Mass Air Flow Sensor Throttle Position Correlation What the P0068 code means This code means that the manifold absolute pressure or mass air flow sensors that detect air flow through the...
P0529 OBD-II Trouble Code: Fan Speed Sensor Circuit Intermittent
P0529 means the cooling fan sent an incorrect voltage signal, caused by open/shorted/corroded wiring, or a damaged fan motor/relay/speed sensor.

How do you set the zone on the compass?

If your car is equipped with an electronic compass, you might find that you need to set the zone correctly. This is because magnetic north and true north are not always the same – it depends on where you’re located...

Why does my truck cut off when the TPS is unplugged

Hello there, A few different items can cause the truck to shut off this way. The TPS may not be the cause. Most likely causes would be a vacuum leak, MAF sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor), oxygen sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-oxygen-sensor), or an exhaust leak....

Hello my truck is almost stalling if i put in reverse

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com