Acura TL Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,052)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,052)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Acura TL Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Acura TLL5-2.5LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1999 Acura TLV6-3.2LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1998 Acura TLL5-2.5LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Acura TLV6-3.5LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2014 Acura TLV6-3.5LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2014 Acura TLV6-3.7LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Acura TLV6-3.5LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1998 Acura TLV6-3.2LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Acura TL Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(1,052)

Rating Summary
981
35
8
7
21
981
35
8
7
21

Andrew

23 years of experience
169 reviews
Andrew
23 years of experience
Acura TL V6-3.2L - Starter - Dallas, Texas
Mr. Macura arrived promptly following a courtesy notification of his ETA. He quickly confirmed the diagnosis and set about to repair. Andrew worked efficiently and knowledgeably despite my car's attempts to slow him. He completed the installation, confirmed the repair corrected the problem, and provided useful information should a question/problem arise - all in less time than I anticipated. Clearly a Master of his profession. An all around positive experience.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Acura TL V6-3.2L - Starter - Jacksonville, Florida
Very knowledgeable and knows his career well

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Acura TL V6-3.2L - Spark Plugs - Arlington, Virginia
Tyrone showed up ontime and took care of the job quickly. He also was patient and indulged my questions and curiousity. I’ll look for him as I book my next services.

Brett

10 years of experience
197 reviews
Brett
10 years of experience
Acura TL V6-3.2L - Positive Crankcase Ventilation (PCV) Valve - Austin, Texas
5 Star service as always...One of only two I know I can trust ...

Excellent Rating

(1,052)

Rating Summary
981
35
8
7
21
981
35
8
7
21
Number of Acura TL services completed
11572+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

How Long Does a Windshield Wiper Refill Last?
Regardless Regardless of where you live, you will probably have to deal with rain and other forces of nature from time to time. This means that you will need to take the time to make sure that all of the...
How to Get a Maine Driver's Permit
In In order to begin driving on the roads in Maine, anyone under the age of 21 must go through the graduated driver’s license permit, which begins with a learner’s permit. This driver’s permit allows those who are at least...
P2229 OBD-II Trouble Code: Barometric Pressure Circuit High
P2229 P2229 code definition Barometric pressure circuit high What the P2229 code means This trouble code indicates that the powertrain control module has detected a pressure that exceeds the manufacturer’s threshold of acceptance in the barometric pressure circuit. What are...

2007 Camry XLE V6 hook jumper cables on the wrong terminal now it won't accelerate past 25

Hi there: It's possible that the mechanic is correct, as hooking the battery cables up in reverse can cause serious electrcial damage within the ECU. In regards to why there isn't a fuse to protect it; you'd have to ask...

hi chris... i have a 2002 bmw x5 well taken care of.... light stays on in the car when you turn off key. think it has drained bat

The existing battery should be load tested (https://www.yourmechanic.com/services/battery-is-dead-inspection) and if it fails the battery should be replaced (https://www.yourmechanic.com/services/battery-replacement). The cost of replacement can be obtained by clicking on "Get a Quote" at the foregoing service link (https://www.yourmechanic.com/services/battery-replacement). But, at the...

Car squeals only when accelerating/coasting. Stops when braking

Hi Taylor. Thanks for contacting us today. A noise like you are describing is often caused by wheel bearings that have lost lubrication and are wearing out. It can also be due to a loose serpentine belt or drive belt....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com