Electronic Brake Control Module Replacement at your home or office.

Our certified mechanics come to you · Backed by our 12-month, 12,000-mile warranty · Get a fair and transparent estimate upfront


Electronic Brake Control Module (EBCM) Replacement Service

What is the Electronic Brake Control Module (EBCM) all about?

Prior to modern designs, vehicle braking systems were controlled hydraulically without monitoring by electrical systems. Over the past three decades, vehicle manufacturers have developed safety features and advancements in vehicle design that have brake systems which use sensors and modules. Now, each wheel usually has a speed sensor, the transmission is equipped with a vehicle speed sensor, and proportioning valves have gone from hydraulic to electronic. All of these features work together for the operation of both antilock brakes and traction control.

One central module performs all the control functions for these systems and is known as the electronic brake control module. It is mounted in the engine bay, typically alongside the brake fluid reservoir. It receives signals from the several sensor inputs, and compares the current status of the sensors to all the logical maps and associated reactions in its onboard memory. The EBCM performs these functions in real-time, or dozens of times per second. If the EBCM malfunctions, you can experience ABS or traction control activation when it is not necessary, or even when the brakes aren’t applied. The ABS or traction control may not function when it is necessary, such as in slippery conditions. A faulty EBCM may or may not turn on the ABS warning light, depending on the issue.

Keep in mind:

  • The electronic brake control module, or EBCM, can be difficult to diagnose as control modules aren’t able to monitor their own condition for failures.
  • Although uncommon, any ABS brake-related symptoms can be a failure in the EBCM.

How it's done:

  • The electronic brake control module is faulty and it needs to be replaced
  • The defective electronic brake control module is removed
  • The new electronic brake control module is installed and engine scanned for codes
  • The engine is started and the electronic brake control module is tested for operation
  • The vehicle is road tested for proper operation of the electronic brake control

Our recommendation:

The electronic brake control module will last the life of your vehicle in many cases, although as an electrical component it can be prone to unexpected failure. There is no preventative measure or maintenance you can perform for the EBCM. If you suspect the electronic brake control module is faulty, have one of our expert technicians diagnose and replace it if necessary.

What common symptoms indicate you may need to replace the Electronic Brake Control Module (EBCM)?

  • ABS brake-related codes that don’t correlate with actual failures can indicate a problem with the EBCM.
  • General ABS warning light may come on.
  • Check Engine light may illuminate.
  • ABS brakes or traction control may not function when they should.

How important is this service?

It is very important for safety reasons that your brakes work properly. Improper or unnecessary ABS brake application can cause accidents if you are unable to slow down to avoid a collision. Electronic brake control is a safety feature that should be functioning at all times.

Fast and easy Electronic Brake Control Module (EBCM) Replacement service at your home or office.


Recent articles & questions

A Buyer's Guide to the 2012 Kia Sedona
The The Kia Sedona has been increasing in popularity over the years and the 2012 model kept the streak alive. This minivan can be yours at a very reasonable price, yet you don’t have to worry that this will mean...
Oklahoma Parking Laws: Understanding the Basics
The The parking laws in Oklahoma are in place to help keep people safe and to ensure that traffic is able to flow properly. People who park incorrectly or in locations that are dangerous could cause serious issues, but many...
P2055 OBD-II Trouble Code: Reductant Injector Circuit High Bank 1 Unit 2
P0255 code means there is an issue with the reductant injector air pressure sensor often due too loose wiring or faulty sensors.

What does the Cal message mean?

The Cal message can appear on your driver information center (DIC). When the DIC displays this alert, it means that the DIC compass needs to be calibrated. If this alert is accompanied by three dashes, then your compass is not...

My air just turned off on it's own today.

On a vehicle that is 15 years old you may have a leak in the condenser (https://www.yourmechanic.com/services/ac-condenser-replacement), compressor (https://www.yourmechanic.com/services/ac-compressor-replacement), or evaporator. One of these faulty components may be leaking down the pressure. It's also possible that one of the pressure...

Is a 2008 Mercedes C300 sport sedan with 75,000 miles a good buy?

In evaluating the wisdom of buying a particular model of car (used or new), consult the database of the National Highway Traffic Safety Administration, NHTSA (http://www.safercar.gov). The NHTSA database contains model specific consumer complaints, official recalls and factory service bulletins...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com