Volvo XC70 Banging noises when driving over the bumps Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(67)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(67)

Banging noises when driving over the bumps Inspection Service

How much does a Banging noises when driving over the bumps Inspection cost?

On average, the cost for a Volvo XC70 Banging noises when driving over the bumps Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Volvo XC70L6-3.2LService typeBanging noises when driving over the bumps InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2009 Volvo XC70L6-3.0L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Volvo XC70L5-2.5L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Volvo XC70L6-3.2LService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2016 Volvo XC70L4-2.0L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2012 Volvo XC70L6-3.0L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2010 Volvo XC70L6-3.0L TurboService typeBanging noises when driving over the bumps InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2013 Volvo XC70L6-3.2LService typeBanging noises when driving over the bumps InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo XC70 Banging noises when driving over the bumps Inspection prices

Unfortunately we don’t always find ourselves driving over perfectly smooth, freshly paved roads. And while rough roads may cause some issues with your vehicle, they can also help diagnose potential issues. A banging noise while driving over bumps can be startling for a driver, especially if the same noise did not manifest itself on flat roads. If you notice a banging noise while driving over a bump, you should have a mechanic inspect your vehicle.

How this system works:

Your vehicle’s suspension system is made up of many components designed to adjust when driving over rough terrain, to ensure a comfortable ride. When these components begin to fail, they may produce clunking or banging noises to let you know something has gone wrong. However, typically when suspension components like tie rod ends and ball joints fail, they will make a banging noise all the time, and not just over bumps. The fact that the noise only seems to occur while driving over a bump may be a sign of a different issue.

Common reasons for this to happen:

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Worn Control Arm Bushings: The control arms on your vehicle’s suspension allow for movement up and down when driving on uneven terrain. Part of the control arm assembly are bushing, typically made of rubber or polyurethane. The bushings are designed to dampen any noise that might be created when your vehicle goes over a bump. If the bushing wear down, the noise is not dampened and you may hear a resulting bang when driving over bumps.

  • Loose Brake Caliper: Your vehicle’s brake calipers are pistons that engage the brakes when the brake pedal is applied. Calipers are typically secured with bolts and do not move. If a caliper bolt has become loose it may cause the caliper to make a banging noise when driving over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the banging noise when going over bumps. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

The mechanic will begin by raising the vehicle and removing tires to get a better view of the vehicle’s suspension. From here, he or she will be better able to access and replace components that may have failed.

If your vehicle is equipped with a sway bar link, the mechanic will inspect it for any signs of superficial damage. The mechanic should then look at the sway bar bushings to see if they are worn and need to be replaced. The mechanic will then remove the old bushings and sway bar if necessary, and replace them.

If the mechanic suspects the control arm bushings, he or she will check for signs that the bushing has worn down. The mechanic should also inspect the whole control arm assembly and replace it if necessary. The mechanic will then install the new bushings.

While having a loose caliper bolt is rare, it is important to have the calipers inspected because of the potential loss in braking the bad calipers could create. The mechanic should check to make sure that the bolts are securely tightened and the calipers is lined up with the rotor. If the calipers was loose it may have warped over time and become ineffective. The mechanic will replace the caliper if it is needed.

How important is this service?

A vehicle that makes a banging noise while going over a bump may reveal an issue with the suspension system. Not only does the suspension system provide a comfortable ride but it plays a critical role in the safety of the vehicle, especially when cornering and braking. If you notice a noise while going over bumps, you should have it inspected to make sure that the suspension is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(67)

Rating Summary
65
1
0
0
1
65
1
0
0
1

Antonios

18 years of experience
56 reviews
Antonios
18 years of experience
Volvo XC70 L6-3.2L - Banging noises when driving over the bumps - West Roxbury, Massachusetts
Super helpful, knowledgeable, and thorough! He was terrific.

Attila

19 years of experience
920 reviews
Attila
19 years of experience
Volvo XC70 L6-3.2L - Pre-purchase Car Inspection - Plainfield, New Jersey
Attila was very throughrout with the inspection of the car and confirmed my suspicions about the breaks

David

10 years of experience
170 reviews
David
10 years of experience
Volvo XC70 L4-2.0L Turbo - Pre-purchase Car Inspection - Orlando, Florida
David was excellent to work with, he spent all the time that was required to answer my questions about a car he inspected for me. He was very professional and I’d use him again in a heartbeat.

Pierre

9 years of experience
310 reviews
Pierre
9 years of experience
Volvo XC70 L5-2.5L Turbo - Brake Caliper Replacement (Driver Side Front, Passenger Side Front) - Brookline, Massachusetts
Wonderful, from start to finish!

Excellent Rating

(67)

Rating Summary
65
1
0
0
1
65
1
0
0
1
Number of Volvo XC70 services completed
737+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Speedometer Sensor
Common signs include the speedometer not working, cruise control not engaging, Check Engine Light coming on, and loss of power.
How Long Does an EGR Vacuum Modulator Last?
Not Not only does the EGR (exhaust gas recirculation) system in your vehicle cut down on emissions, but it also helps to make your engine run more efficiently. However, in order for this to be true, every single component in...
P0836 OBD-II Trouble Code: Four Wheel Drive (4WD) Switch Circuit
P0836 means there is an issue with a circuit for the four wheel drive switch, possibly due to defects in the switch, actuator, or another component.

I think my clutch or clutch master cyclinder went out

Hello - it sounds like the clutch hydraulics are not functioning properly. Check for adequate fluid level first - the clutch fluid reservoir is near the brake fluid reservoir on the firewall (driver side). If the fluid level is low,...

Brakes grinding on wet weather and clanking

If you've had brake work done recently, and the result is noisy brakes, you need to take the car back to the shop that did the brakes. It's not that unusual for new brakes to make new noises and they...

Crank, no start

Hi Chris. Thanks for contacting us today. The crankshaft position sensor is located near the front of your Saturn's motor, near the front crankshaft pulley. It is possible that this is the source of your hard to start issue, however,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com