Volvo S90 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Volvo S90 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 Volvo S90L4-2.0L Turbo HybridService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Volvo S90L4-2.0L Turbo HybridService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Volvo S90L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Volvo S90L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2021 Volvo S90L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Volvo S90L4-2.0L Turbo HybridService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Volvo S90L6-2.9LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2019 Volvo S90L4-2.0L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo S90 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Volvo S90 L6-2.9L - Brake Pads Replacement (Front, Rear) - Chicago, Illinois
VERY OUTSTANDING WORK !!!!!!!!!!!

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Volvo S90 L6-2.9L - Oil Change - Daly City, California
Grzegorz was awesome, thorough, and very knowledgeable... He did oil change for my car, took pictures and identify all problems with the car in his 50-point inspection report. Would highly recommend Grzegorz for your next automotive service.

Jeremy

20 years of experience
603 reviews
Jeremy
20 years of experience
Volvo S90 L4-2.0L Turbo - Serpentine/Drive Belt - Lake Worth, Florida
Great job!

Peter

27 years of experience
86 reviews
Peter
27 years of experience
Volvo S90 L6-2.9L - Check Engine Light is on - Fresno, California
Very happy with his service, very knowledgeable.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Volvo S90 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Does a Throttle/Accelerator Pedal Position Sensor Last?
The The throttle/accelerator pedal position sensor detects the position of the accelerator pedal. This information is then transmitted to the vehicle’s computer - the engine control module (ECM). From there, the data is then sent from the computer to the...
Industry News for Automotive Techs: September 3-9
A remote assist J2534 tool, Honda's new pedestrian detection technology, and advancement of variable superchargers are some big stories this week.
P2213 OBD-II Trouble Code: NOx Sensor Circuit Bank 2
P2213 means there is an issue with the NOx Sensor Circuit Bank 2, most likely due to a faulty catalytic converter, or bad oxygen sensors.

What does the Tailgate Open warning light mean?

The Tailgate Open warning light is located on the instrument panel, and will illuminate when the trunk is not properly closed. When the trunk is closed completely, the light will go away. Tip Like all warning lights, the Tailgate Open...

Clicking noise at lowspeed turns, vibration when stopping abruptly, mechanic said need axles & no grease left. how long do i have?

As for "how long you have", unfortunately you needed to replace them when they were mentioned. With no grease to protect and lubricate them, the clicking noise you hear is the joints (https://www.yourmechanic.com/services/ball-joint-front-replacement) basically grinding themselves apart. Is this potentially...

I have a 2002 Ford Fairmont Ghia V6 4.0L. I’ve recently purchased it second hand and for the first few days nothing was wrong! but I’ve had it a few weeks now and a loud squeaking noise is coming from the rear end when I’m going over bumps or even just getting out of the car!

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com