Volvo S70 Car starts and then dies Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(58)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(58)

Car starts and then dies Inspection Service

How much does a Car starts and then dies Inspection cost?

On average, the cost for a Volvo S70 Car starts and then dies Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Volvo S70L5-2.3L TurboService typeCar starts and then dies InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1999 Volvo S70L5-2.4L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Volvo S70L5-2.4L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Volvo S70L5-2.4L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1998 Volvo S70L5-2.3L TurboService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1999 Volvo S70L5-2.4LService typeCar starts and then dies InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1998 Volvo S70L5-2.4LService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1999 Volvo S70L5-2.3L TurboService typeCar starts and then dies InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Volvo S70 Car starts and then dies Inspection prices

Starting a vehicle only to have it quit immediately after can be confusing and annoying for many drivers especially if their vehicle has not experienced this type of issue before. Typically, a vehicle will start and then quit because of an issue with the fuel or electrical system. It is important to monitor fuel levels as well as warning lights which can signal to the driver that a vehicle may quit unexpectedly.

How this system works:

To start a vehicle, the electrical system, composed of the battery and starter, turns the engine over. Once running, the engine requires a constant flow of gasoline and good spark to keep that fuel igniting. If gasoline is not readily available, or if there is not enough spark, the engine will quit. More modern vehicles with sophisticated computers may affect the way the vehicle runs. These computers help the car run efficiently but can also shut a car down if the fuel/air mixture is not correct. While an older vehicle may be less sophisticated and easier to diagnose, the computers on modern cars can provide more specific information when connected to a code scanner/reader.

Common reasons for this to happen:

  • Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so that the right amount of fuel can be delivered from the fuel injectors. When a sensor begins to fail, the vehicle’s computer may generate an error code to indicate that something has gone wrong. An issue with the mass airflow sensor may manifest itself when a car starts and then stalls soon after starting.

  • Fuel Pump Relay: The fuel pump relay functions much like a fuse for an electric fuel pump. The fuel pump relay engages as the vehicle is started and starts the fuel pump. While the vehicle is running, the fuel pump relay turns off and the fuel pump is powered by the oil pressure sending unit. If the vehicle’s computer is unable to keep the fuel pump relay running throughout the starting process, the vehicle may start and quit immediately after starting.

  • Ignition Coil: Your vehicle’s ignition coil takes the low voltage of the battery and provides the thousands of volts needed to create a spark in the spark plugs. When an ignition coil begins to fail, it may struggle to provide consistent spark to the plugs, causing the engine to stall after starting.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why the vehicle starts and then dies. The mechanic will then provide a detailed inspection report outlining why the vehicle quit and the cost of any repairs that need to be made.

How it's done:

A mechanic will begin diagnosing your vehicle’s issue by plugging a code reader/scanner into the vehicle’s computer. The mechanic should be able to get more information from your vehicle’s computer on what component has failed. Using this information, the mechanic can begin necessary repairs.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic should check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

If the mechanic suspects an issue with the fuel pump relay, he or she should check the vehicle’s computer for a problem. If the vehicle’s computer is having difficulty providing consistent power to the fuel pump relay, the computer may need to be reprogrammed or replaced. If the vehicle’s computer is functioning normally, the mechanic may need to replace the fuel pump relay.

If the mechanic suspects that the ignition coil may be faulty, he or she should first disconnect the battery before beginning work. The mechanic should then begin the process of disconnecting wires from the ignition coil and removing it from the engine bay. The mechanic will then install the new ignition coil and ensure that it is connected properly. The mechanic should then reconnect the battery and test the new coil.

With all repairs, the mechanic will ensure the newly installed parts work properly. The mechanic can then turn off and warning lights that may have come on while the vehicle was not running properly.

How important is this service?

If your vehicle is starting but dying soon after starting, you should have it checked out by a mechanic. Issues involving the fuel management and electrical systems will become worse if not dealt with. Diligence and paying attention to warning lights may help prevent further damage to critical engine component and may save money in repairs. A vehicle that quits after starting can be inconvenient and having a mobile mechanic inspect and repair you vehicle will ensure that you and your vehicle are back on the road soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(58)

Rating Summary
51
6
1
0
0
51
6
1
0
0

Jeremy

20 years of experience
613 reviews
Jeremy
20 years of experience
Volvo S70 L5-2.4L - Car starts and then dies - West Palm Beach, Florida
He was very professional

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Volvo S70 L5-2.4L - Stabilizer Bar Links Replacement (Front) - Charlotte, North Carolina
Excellent,very knowledgable. He arrived on time,cleaned up after he completed the job. I will request him for any future work I need on my vehicle.

Rodney

36 years of experience
547 reviews
Rodney
36 years of experience
Volvo S70 L5-2.3L Turbo - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Stockton, California
Rodney * Arrived earlier than scheduled * Got right to the task at hand * Finish the job in the time the was estimated * Gave a report of other recommendations that he observed with estimate * He also explained to my husband what his inspection and codes meant. I would recommend Rodney

Adrian

31 years of experience
75 reviews
Adrian
31 years of experience
Volvo S70 L5-2.4L - Crankshaft Position Sensor - Fresno, California
Outstanding Mechanic

Excellent Rating

(58)

Rating Summary
51
6
1
0
0
51
6
1
0
0
Number of Volvo S70 services completed
638+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How To Use Hazard Lights
Your Your car is equipped with a number of different lights. Depending on the light in question, they serve purposes ranging from visibility to directionality to safety to convenience. Where do your hazard lights fit into that? Actually, it’s a...
How to Use a Gas Station Car Wash
It It is inevitable that your vehicle will need to be washed, and it’s convenient to do so when you go to a gas station to fuel up. Many gas stations have a car wash on site, whether it is...
P0439 OBD-II Trouble Code: Catalyst Heater Control Circuit
Trouble code P0439 means the catalyst heater control circuit has sent the PCM a below-acceptable voltage reading.

Car doesn't go straight yet, no mechanical failure can be found

The vehicle is not properly aligned. Prior to performing an alignment be sure the suspension fully checks out and is not worn. Also, if you have any suspicion of frame damage that should be evaluated at the time of the...

Had valve job done on my 2010 Nissan Titan and head gasket and valve cover gasket replaced, truck still puffs could of smoke

If you have not already done so, replace the PCV valve. You should have the engine compression tested to see if any one cylinder is low on compression. The cause of white smoke that is not just condensation in the...

when I open my door my interior lights won’t turn on.

You may have a problem with the interior lighting module or light switch is in wrong position. You will need to have the system scanned using a scanner that can see the interior light module and all the different door...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com