Volvo 940 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Volvo 940 Front Crankshaft Seal Replacement is $777 with $357 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Volvo 940L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1242.14Shop/Dealer Price$1447.23 - $2038.18
1991 Volvo 940L4-2.3L TurboService typeFront Crankshaft Seal ReplacementEstimate$1251.43Shop/Dealer Price$1460.30 - $2074.52
1992 Volvo 940L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1185.63Shop/Dealer Price$1378.12 - $1943.05
1991 Volvo 940L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1336.65Shop/Dealer Price$1566.89 - $2245.08
1994 Volvo 940L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$1215.11Shop/Dealer Price$1419.39 - $2009.74
1993 Volvo 940L4-2.3L TurboService typeFront Crankshaft Seal ReplacementEstimate$1159.45Shop/Dealer Price$1345.82 - $1891.42
1994 Volvo 940L4-2.3L TurboService typeFront Crankshaft Seal ReplacementEstimate$1181.99Shop/Dealer Price$1373.62 - $1935.85
1995 Volvo 940L4-2.3L TurboService typeFront Crankshaft Seal ReplacementEstimate$1181.99Shop/Dealer Price$1373.57 - $1935.76
Show example Volvo 940 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(34)

Rating Summary
31
3
0
0
0
31
3
0
0
0

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Volvo 940 L4-2.3L - Alternator - Leonia, New Jersey
Attila overcame the challenges posed by working on my 1995 Volvo. He worked around the aging and rusted parts and was able to successfully install a new alternator. The car is running like new!

Hollis

31 years of experience
30 reviews
Hollis
31 years of experience
Volvo 940 L4-2.3L - Oil Pressure Light is on - Ellenwood, Georgia
Very good experience...great advice....fixed issues new parts were not needed for...fantastic job.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Volvo 940 L4-2.3L - Car is not starting - Leonia, New Jersey
He immediately diagnosed the problem and confirmed it with a high degree of technical expertise.

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Volvo 940 L4-2.3L - Battery - Leonia, New Jersey
Very knowledgeable and totally professional. His experience with Volvos is very reassuring, and I plan to use him for any future problems.

Excellent Rating

(34)

Rating Summary
31
3
0
0
0
31
3
0
0
0
Number of Volvo 940 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Choose a Window Tinting Shop
Choosing Choosing a shop to tint your windows isn’t as simple as looking up a few places online and making a decision right away. It’s difficult to read through the advertisements: some places offer the “best deal,” while others advertise...
How to Obtain an A1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be an A1 Engine Repair Technician.
How To Add Air To Your Tires
Checking and adding air pressure to your tires requires finding the proper tire pressure, a good gauge, and an air compressor with a tire chuck.

Loud rattling from power steering pump

From the symptoms you describe on your Kia and the leaking you are observing, it sounds like the power steering pump is failing internally. This is due to running low on power steering fluid. The power steering pump plays...

Car won't go over 30mph - Check Engine light on and off, car shakes a bit 1997 Chrysler Cirrus

Hi there - first task to to extract the problem codes that are causing the Check Engine (https://www.yourmechanic.com/article/what-does-the-check-engine-warning-light-mean) light to illuminate. This will guide diagnosis, and save time and money. Most auto parts stores will read codes for you for...

Is it normal for the srs light to be on in my 2002 Honda Accord?

The supplemental restraint system (SRS) light should come on momentarily when the ignition is turned on. It should then go out. If the light stays on continuously, there is a problem in the SRS system. The cause of the light...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com