Volvo 850 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(47)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(47)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo 850 Power Steering Pressure Hose Replacement is $273 with $133 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Volvo 850L5-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$420.92Shop/Dealer Price$491.00 - $693.14
1997 Volvo 850L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.35 - $740.72
1997 Volvo 850L5-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.39 - $740.78
1996 Volvo 850L5-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.39 - $740.78
1993 Volvo 850L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$411.91Shop/Dealer Price$481.72 - $683.66
1996 Volvo 850L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.58 - $741.12
1995 Volvo 850L5-2.4LService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.41 - $740.82
1995 Volvo 850L5-2.3L TurboService typePower Steering Pressure Hose ReplacementEstimate$470.31Shop/Dealer Price$539.39 - $740.78
Show example Volvo 850 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(47)

Rating Summary
44
2
0
1
0
44
2
0
1
0

Dennis

42 years of experience
6 reviews
Dennis
42 years of experience
Volvo 850 L5-2.4L - Noise from engine or exhaust - Soquel, California
Dennis was very knowledgeable about my 1993 Volvo 850, and I feel that is very unique knowledge .

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Volvo 850 L5-2.3L Turbo - Smell in the car - Simi Valley, California
Peter was knowledgeable , explained everything I needed, was on time, and easy to understand what I needed. Thanks Peter!!!

Whitney

40 years of experience
783 reviews
Whitney
40 years of experience
Volvo 850 L5-2.4L - Car is not starting - San Jose, California
Loved that he came early. Was very professional. Checked what he thought the problem was, and ruled it out first before saying it was definitely the problem. He checks your car entirely to recommend what needs work. He's the perfect car doctor. Also gives great advise about cars and makes you feel valued as a customer, he shows pride in what he does. Which I as a customer value a lot. Thanks your mechanic for great service. Got an at home inspection and have already started telling friends about it, would recommend!

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Volvo 850 L5-2.4L - Mass Airflow Sensor - West Sacramento, California
Very honest and an awesome guy! I would recommend Jeff to anyone.

Excellent Rating

(47)

Rating Summary
44
2
0
1
0
44
2
0
1
0
Number of Volvo 850 services completed
517+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

What Do the Press Clutch or Press Brake Pedal Warning Lights Mean?
The press clutch and press brake pedal lights remind you to press on the brake or clutch before starting the engine or while in park mode.
How to Renew Your Car Registration in Florida
There There are a number of things that a Florida resident will have to do in order to ensure they stay in compliance with all of the laws in their state. If you drive a car on the roadways in...
How to Make an Emergency Stop in Your Car
Every driver should know the best way to brake their car. If your car brakes go out, downshift to use engine braking to slow you down.

The tachometer in my car jumps up by 100 RPM when I turn the steering wheel

Hello. This is normal for the most part. With the hydraulic power steering, there is an extra load placed on the engine when you turn the steering wheel. The computer tries to pick up the engine speed to compensate for...

The front passenger door will not unlock or open. How can I fix this? What part do I need? 2002 Ford Escape

Hi there - this sounds like the door lock actuator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-door-lock-actuator) has failed. This a common failure over the years, especially with high-use doors like the front ones. I recommend a car door lock actuator replacement (https://www.yourmechanic.com/services/door-lock-actuator-replacement) performed by a...

How much for brake pads front and back cost about with labor

Hi there. To receive an estimate to have this service completed on your Land Rover, click this link to the brake rotor / pad replacement (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) page. Once on that page, click the blue Get a Quote button and enter...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com