Volkswagen Tiguan Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(270)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(270)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Volkswagen Tiguan Front Crankshaft Seal Replacement is $840 with $14 for parts and $826 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$2058.40Shop/Dealer Price$2365.62 - $3239.47
2012 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$928.74Shop/Dealer Price$956.41 - $1015.07
2009 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$928.74Shop/Dealer Price$956.56 - $1015.34
2013 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$890.00Shop/Dealer Price$908.13 - $937.84
2015 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$890.00Shop/Dealer Price$916.82 - $953.06
2011 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$928.74Shop/Dealer Price$957.38 - $1016.77
2017 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$2005.24Shop/Dealer Price$2302.27 - $3168.49
2010 Volkswagen TiguanL4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$928.74Shop/Dealer Price$956.55 - $1015.32
Show example Volkswagen Tiguan Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(270)

Rating Summary
259
4
0
1
6
259
4
0
1
6

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Battery - Rockville, Maryland
Would recommend!

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Check Engine Light is on - Duluth, Georgia
Great service. On time, would ask for Kevin to work on my car again.

Adam

18 years of experience
124 reviews
Adam
18 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Oil Change - Houston, Texas
He got lost but came to the house 30 minutes late which the website sent him to the wrong place. Knowledgeable about the vehicle he was doing maintenance on and was very quick in what he did.

Jacob

13 years of experience
329 reviews
Jacob
13 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Brakes, Steering and Suspension Inspection - Garland, Texas
Great service, highly recommend. Jacob communicated on his timing of the appointment, checked multiple points on the car to ensure there were no additional areas of concern, and communicated and showed areas he was addressing while working on my car. The service is extremely convenient and will come to wherever you would like the service performed. Even added on another quick service on the spot - flexible and efficient - will be using Jacob and Your Mechanic in the future.

Excellent Rating

(270)

Rating Summary
259
4
0
1
6
259
4
0
1
6
Number of Volkswagen Tiguan services completed
2970+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Diagnose a Stalling Car
It’s It’s incredibly frustrating to have a car that stalls and it always seems to happen at the worst possible time – like when you’re in middle of a busy intersection with fifty enraged drivers behind you. There are a...
How to Effectively Deal With a Car Salesman
When it comes to buying a new or used car, some car salesmen and women like to use high-pressure tactics to make their sales. Their job is to get as much money as they can for the vehicles they sell,...
2012 Subaru Outback vs. 2012 Chevrolet Impala: Which One Should I Buy?
When you compare a 4-door sedan versus a 4-door wagon, there are going to be some obvious differences. Even though the Outback looks car-like, the ride, the handling, and the mileage are going to make it more similar to an...

The "hold" light keeps popping up on its own and it causes the car not to get out of third gear.

Try holding down the "HOLD" button for about 5 seconds and this should correct the problem. If it does not, you may have a computer issue that will require diagnosing with a scanning tool. In this case I would recommend...

Indicators and brake lights not working

Hi there. When the tail lights don't work, either brake or turn signal, it's typically an electrical relay or fuse that is damaged which causes this to occur. It's a good idea for you to check and replace any fuses...

Vehicle stalls at idle, on highway all speeds, stop lights. Will restart most times.

Hello. You likely have a faulty transmission control module or engine control module. The no communication code has been experienced by many technicians, Chrysler 300, and Dodge Challenger owners alike. The cause of a lost communication code on your particular...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com