Volkswagen R32 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Volkswagen R32 Throttle Body Replacement is $650 with $510 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Volkswagen R32V6-3.2LService typeThrottle Body ReplacementEstimate$1246.46Shop/Dealer Price$1508.87 - $2284.74
2008 Volkswagen R32V6-3.2LService typeThrottle Body ReplacementEstimate$1166.45Shop/Dealer Price$1423.40 - $2190.12
Show example Volkswagen R32 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jeremiah

23 years of experience
61 reviews
Jeremiah
23 years of experience
Volkswagen R32 V6-3.2L - Oil Change - Irving, Texas
The promotion for the bargain priced oil change got me to try the service, but my mechanic, Jeremiah Laroe, will be the the part that makes me use the service again. Jeremiah is a great asset to your company. Some mechanics might know cars as well as Jeremiah does, but very few mechanics can explain things in easy to understand terms like he does, and virtually no mechanics have his people skills.

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Volkswagen R32 V6-3.2L - Battery - Los Angeles, California
Nazareth was friendly and efficient. Arrived right on time and immediately got to assessing the work to be done. He had the work done in no time and got me running.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Volkswagen R32 V6-3.2L - Windshield Wiper Linkage Replacement (Front) - Denver, Colorado
On time and knowledgable! Great experience using this platform!

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Volkswagen R32 V6-3.2L - Car does not shift from park to drive - Atlanta, Georgia
Very helpfull, and informitave! Would highly recomend!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Volkswagen R32 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

B1985 OBD-II Trouble Code: Seat Switch Lumbar Deflate Circuit Failure
B1985 means there the switch lumbar deflate circuit is bad. This is most likely due to a faulty circuitry in the part.
P2033 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 trouble code definition Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2 What the P2033 code means P2033 is an...
P2609 OBD-II Trouble Code: Intake Air Heater System Performance
P2609 P2609 code definition A P2609 trouble code indicates that the PCM has detected abnormal voltage readings from one or more of the intake air heater circuits. This particular trouble code is most often associated with trouble codes P2604, P2605,...

Truck won't start

If this is the factory light on the dash that says "theft" and is blinking fast, then your theft system is activated. You may need to try another key first after locking all of the doors and waiting a half...

I spray painted my chrome wheels flat black a while back and now I want the paint off! Help?

Hi there. The best stuff to use to remove paint off chrome is Rust-Oleum Aircraft Remover (a paint remover for aircraft vehicles). The remover is very powerful, so you will want to cover the paint on your vehicle with cardboard...

I changed my spark plugs and ignition coils and now my car wont start it just clicks i have a 2002 jaguar s type v6 3.0

Hello, thank you for writing in. There are several issues that may have occurred. The first step is to make sure the ignition wires are installed correctly, and that you did not mix up the firing order. You can do...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com