Volkswagen ID.4 Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4,471)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4,471)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Volkswagen ID.4 Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Volkswagen ID.4ElectricService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2022 Volkswagen ID.4ElectricService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Volkswagen ID.4 Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4,471)

Rating Summary
4,196
136
31
27
81
4,196
136
31
27
81

Anthony

16 years of experience
36 reviews
Anthony
16 years of experience
Volkswagen Passat L4-1.8L Turbo - Tune-up - El Paso, Texas
Would highly recommend Anthony to anyone!

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Volkswagen Beetle L4-1.8L Turbo - Battery - Portland, Oregon
Chris was very prompt for our appointment and also very polite and professional. I would recommend him to anyone needing this service.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Volkswagen Tiguan L4-2.0L Turbo - Check Engine Light is on - Fremont, California
Tien is professional and honest. He frankly told me the problem found in my car. I trust him.

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Volkswagen Jetta L5-2.5L - Cooling System Flush - Charlotte, North Carolina
Brikk was on time, professional, and knowledgeable. I would refer him to anyone.

Excellent Rating

(4,471)

Rating Summary
4,196
136
31
27
81
4,196
136
31
27
81
Number of Volkswagen services completed
49181+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

How Is the OBD Used During a State-Required Inspection?
If If you live in an area that requires emissions testing each year, you’ll be required to go through a two-part test. The testing facility will do two things: they’ll measure the gases in your exhaust via a tailpipe test,...
P2071 OBD-II Trouble Code: Intake Manifold Tuning (IMT) Valve Stuck Closed
P2071 P2071 code definition P2071 is a generic OBD-II trouble code indicating a fault with the intake manifold tuning (IMT) valve stuck closed. What the P2071 code means The intake IMT valve is used to tune the airflow inside the...
P0697 OBD-II Trouble Code: Sensor Reference Voltage “C” Circuit/Open
P0697 means there is a fault with the sensor reference voltage "C" circuit, likely due to damaged or shorted wiring or connectors.

How do I remove the head restraints?

If for some reason you wish to remove the head restraints, then you will have to visit a dealer or a mechanic. Because the head restraints are an important safety feature in your seats, you cannot remove them yourself.

Noise coming from the engine

The noise would need to be heard by a mechanic to determine if it is an engine noise, or ignition problem. The code P0455 is a generic code for a major emission vapor leak, and is most common to be...

I have 2 Chevy silverado trucks. One is a 2011 automatic v8 4x4. The other is a 2012 automatic v6 4x4. I want to put the v6 [engine](/topics-engine-chevy/) in my v8 truck. I know I must change the wiring harness and computer components. I need to know if I will have to change the transmissions. Will the v6 engine bolt up to the v8 transmission or will I need to switch them out?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com