Volkswagen Atlas Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Volkswagen Atlas Fuel Injector Replacement is $2159 with $955 for parts and $1204 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Volkswagen AtlasV6-3.6LService typeFuel Injector ReplacementEstimate$3242.84Shop/Dealer Price$3751.26 - $5206.86
Show example Volkswagen Atlas Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(22)

Rating Summary
20
2
0
0
0
20
2
0
0
0

PETE

23 years of experience
96 reviews
PETE
23 years of experience
Volkswagen Atlas V6-3.6L - Oil Change - Wilmington, Delaware
Pete is great at communicating and has a lot of experience. I couldnt ask for an easier service for my vehicle. Thanks Pete.

Chuck

18 years of experience
464 reviews
Chuck
18 years of experience
Volkswagen Atlas V6-3.6L - Brake Pads Replacement (Front, Rear) - Carrollton, Texas
Punctual and on time. He had great communication throughout the day. Would recommend him again. Outstanding service in a timely manner. Kuddos Chuck

Claud

9 years of experience
640 reviews
Claud
9 years of experience
Volkswagen Atlas V6-3.6L - Brake Rotor/Disc Replacement (Front) - Southfield, Michigan
Very convenient, professional service. I was safely back on the road in no time at all.

Charles

5 years of experience
116 reviews
Charles
5 years of experience
Volkswagen Atlas V6-3.6L - Brake Pads Replacement (Rear) - Hermitage, Tennessee
Charles was great. He was knowledgeable and communicated with me in advance and throughout the repair. Super convenient to have him come to me at work and I would definitely recommend him!

Excellent Rating

(22)

Rating Summary
20
2
0
0
0
20
2
0
0
0
Number of Volkswagen Atlas services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

Top Automotive News & Stories: August 4-10
This week's top auto news: even more car recalls, Jaguar's sales growth, new electric car tech, sleek Aston Martins, and more.
How to Replace an Injector Control Pressure Sensor
Diesel engines have an injector control pressure sensor that fails when there is hard starting, decreased power, or an illuminated Check Engine Light.
Veteran and Military Driver Laws and Benefits in South Dakota
The The state of South Dakota offers several important benefits for current and veteran military service members when it comes to drivers’ licenses, license plates and more, including the fact that those stationed out of state never actually need to...

Car runs hot and leaks

The cooling system on these vehicles are known to leak from the head gaskets as the vehicle ages and the cooling system fluid becomes acidic to the point that it starts damaging metal parts of the aluminum heads and starts...

My car starts and then dies several times before it will stay running, but only when it's cold

Hi there. One of the most overlooked issues that can cause hard starting when it's cold is a malfunctioning engine coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). If the coolant level is low, the coolant temperature sensor can send false information to the...

Will a bad air sensor damage your car if it is not fixed immediately, how long do you have to fix it?

If the check engine light is constant (NOT flashing) you might have days to weeks, depending on how much the air fuel ratio departs from the stoichiometric ideal. Too little fuel and the engine runs too hot. Too much fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com