Toyota RAV4 Brakes, Steering and Suspension Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(14)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(14)

Brakes, Steering and Suspension Inspection Service

How much does a Brakes, Steering and Suspension Inspection cost?

On average, the cost for a Toyota RAV4 Brakes, Steering and Suspension Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Toyota RAV4ElectricService typeBrakes, Steering and Suspension InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2021 Toyota RAV4L4-2.5L HybridService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Toyota RAV4ElectricService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Toyota RAV4L4-2.0LService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2013 Toyota RAV4L4-2.5LService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2014 Toyota RAV4L4-2.5LService typeBrakes, Steering and Suspension InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Toyota RAV4L4-2.5L HybridService typeBrakes, Steering and Suspension InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2011 Toyota RAV4L4-2.5LService typeBrakes, Steering and Suspension InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Toyota RAV4 Brakes, Steering and Suspension Inspection prices

The brakes, suspension, and steering systems are all major safety components of any vehicle. If something is going wrong with one of them it can seriously affect the performance and the safety of the car.

There can be simple issues such as worn brake pads, the wheels being out of alignment or leaking steering fluid to the more severe issues like a warped rotor, bad tie rods or failing struts.

Regardless of the issues, getting the brakes, suspension and steering systems inspected and repaired is key to making the car safe to drive.

How this system works:

Brakes

Brakes are available as disc or drums, older vehicles tend to have drum brakes while new models incorporate disc brakes. Both systems use friction and resistance to bring the vehicle to a stop.

Disc brakes have a rotor that is connected to the wheel. Brake pads grind against the rotor, creating friction, which brings the car to a stop. Over time, brake pads and rotors will wear down and have to be replaced.

Drum brakes work on the same principal. A drum is attached to the wheel and when the brake pedal is depressed, brake shoes press against the drum, slowing the vehicle. Brake shoes, like pads will wear out over time.

Suspension

The job of the suspension system is to maximize the friction between the tires and the road, as well as provide stability to the steering system. There are a number of different suspension systems. The main components of the suspension system are struts, shock absorbers, springs and tires.

The springs help to support the weight of the vehicle, they also maintain ride height, and absorb bumps in the road.

The shocks reduce the up and down motion of the car that is produced when the vehicle hits bumps on the road or highway.

Struts replace the shocks and springs on some vehicles. They combine the shock and spring into a single unit.

Tires keep the vehicle in contact with the road and provide traction to make driving safe.

Steering System

The steering system takes the rotation of the steering wheel and converts into the swiveling motion of the wheels.

A rack and pinion system uses a gear set that is enclosed in a metal tube. Both ends of the rack protrude from the end of the tube. A tie rod connects to each end of the rack and the pinion gear is attached to a steering shaft. As the steering wheel is turned, the gear spins which moves the rack.

Common reasons for this to happen:

Brakes

  • Loss of Hydraulic Pressure: The brake system uses hydraulic pressure to push the brake pads against the rotors. If there is a leak in the hydraulic system the brakes will not provide the correct stopping power.

  • Worn Brake Pads: Brake: Brake pads will wear out over time. The have a indictor that will make contact with the rotor and produce a squealing noise when they get too thin. If the brakes are squealing the pads should be replaced. If the squealing turns into a grinding noise, the pads have worn through completely, this can damage the rotors which is a much more expensive repair.

  • Stuck Caliper: The calipers push the brake pads against the rotors. If a caliper gets stuck the vehicle will pull to one side. A failing brake hose can cause this issue.

  • Warped Rotors: If the rotors are exposed to stress, such as towing or mountain driving, they can warp. Warped rotors will cause the vehicle to vibrate and shake while braking.

  • Worn Brake Shoes: This is basically the drum brake version of worn brake pads for disc brakes. The shoes will squeal when they are too thin and need to be replaced. A grinding noise indicates shoes that have been worn through completely.

Suspension

  • Worn Shocks or Struts: In most vehicles the struts will eventually wear out and need to be replaced. If you notice excessive bouncing when going over bumps, or the vehicle nosedives when braking, it may be time to replace the shocks or struts.

  • Uneven Tire Wear: A failing suspension system can lead to uneven tire wear as the system is not holding the wheels even on the road at the proper angle. Look for bald spots on your tires. Suspension problems should be inspected and repaired as soon as possible.

  • Bad Spring Coils: In most cases, spring coils will last the life of the car but they can break. If the vehicle is not driving smoothly or leaning heavily to one side, it could be an issue with the spring coils. This should be fixed immediately.

  • Leaking Shocks: Shocks will often have to be replaced over the life of a car. If there is oil leaking on the garage floor or a leak is visible from the shocks, it is time to get them replaced.

Steering

  • Bad Tie Rods: Tie rods are the component that connects the steering linkage to the wheels of a vehicle. Eventually tie rods will wear out. As they do the vehicle will go out of alignment and wear the tires faster. There may also be a squeaky sound and the steering wheel may be harder to turn.

  • Loose Lug Nuts: Something as simple as a loose lug nut will cause the steering wheel to shake. This is a fairly easy problem to fix.

  • Unbalanced Wheels: This problem can also cause the steering wheel to shake at certain speeds. At higher speeds this can become dangerous. The tires should balanced as soon as possible.

  • Steering Gearbox Not Responding or Hard to Steer: if the steering wheel does not seem to be responding properly or it is hard to steer this can indicate a problem with the steering gearbox. This issue can quickly become dangerous. The steering system should be inspected and repaired as soon as possible.

  • Power Steering Malfunction: The power steering component can malfunction for a number of reasons. Fluid may be leaking due to damaged seals on the power steering pump, or there could be a leak in one of the power steering hoses. A whirring or siren-like sound coming from the steering pump can be an indicator of this problem.

  • Power Steering Pump: A failing power steering pump can make the steering wheel hard to turn and it may make a groaning noise when the wheel is turned. A failing pump will eventually die and need to be replaced.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the brake, suspension or steering issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

All three of these systems are vital to the safety of the vehicle. While some issues with these systems will be more of an inconvenience than a safety issue, other problems can lead to dangerous driving conditions and the problem should be addressed as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

Steve

15 years of experience
148 reviews
Steve
15 years of experience
Toyota RAV4 L4-2.4L - Brakes, Steering and Suspension Inspection - Bronx, New York
Good morning! Steve was on time, gave me a call before he got there. Steve was very knowledgeable and informative of what was wrong with my car. I will hands down, have him check my car in the future. Thank you!

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Toyota RAV4 L4-2.5L - Brakes, Steering and Suspension Inspection - Alpharetta, Georgia
As always, Michael was great. He shoots straight about what needs immediate attention and what can wait. That allows me to make well informed decisions and not have to come up with a big chunk of money at one time. When he showed up to fix my water pump that needed "immediate attention" recommended by another mechanic while having some recall work done, he didn't see the problem diagnosed by that dealership. I said he couldn't justify doing work on something that wasn't broken. I keep using Michael as often as possible because he has proven to be trustworthy. That's something I can't say of all mechanics.

Jeffrey

27 years of experience
870 reviews
Jeffrey
27 years of experience
Toyota RAV4 V6-3.5L - Brakes, Steering and Suspension Inspection - Indian Trail, North Carolina
We have used Jeffrey twice now and have been completely satisfied with our experience both times. Will definitely use again!

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Toyota RAV4 L4-2.0L - Brakes, Steering and Suspension Inspection - Berkeley, California
Really experienced! Gave excellent service and advice. Thanks, Tien!

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Toyota RAV4 Brakes, Steering and Suspension Inspection services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

P2284 OBD-II Trouble Code: Injector Control Press Sensor Circuit Range / Performance
P2284 means the Powertrain Control Module (PCM) has bad readings from the injector control pressure circuit, often due to low oil level or pressure.
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Michigan
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Michigan at the Michigan Trucking Association.
P0626 OBD-II Trouble Code: Generator Field/F Terminal Circuit High
P0626 means there's a fault on the generator field circuit due to a faulty alternator, battery, wiring, or poor communication between control module.

Where are the fuses located in my vehicle?

Fuses provide important protection for sensitive electronics. If too much voltage is sent into a circuit, the fuse blows. This protects your accessories (your radio, the headlights, the dash lights, etc.) but you’ll need to replace the blown fuse before...

My truck is overheating I changed the thermostat and radiator.so why is it still overheating?

If you changed the radiator and thermostat and still overheats due to no coolant circulation then you have a water pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-water-pump) that is not circulating the coolant. The pump fins can get worn off, unable to pump and circulate...

2001 c240 intermediate crank & stall at idle deceleration. Ecu code p0300 p0341. Changed cam please sensor cleaned maf. No fix.

Hi There, As you know, code P0341 relates to the camshaft position sensor and code P0300 relates to a misfire which is likely a result of the faulty camshaft sensor. It may be possible for the same code to exist...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com