Toyota Pickup Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(165)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(165)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Toyota Pickup Control Arm Assembly Replacement is $250 with $110 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Toyota PickupV6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$865.16Shop/Dealer Price$954.91 - $1195.00
1991 Toyota PickupL4-2.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$832.72Shop/Dealer Price$916.11 - $1151.44
1994 Toyota PickupV6-3.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$832.72Shop/Dealer Price$916.21 - $1151.60
1995 Toyota PickupV6-3.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$878.03Shop/Dealer Price$1062.90 - $1613.32
1994 Toyota PickupL4-2.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$878.03Shop/Dealer Price$1064.37 - $1615.90
1991 Toyota PickupV6-3.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$832.72Shop/Dealer Price$916.71 - $1152.47
1991 Toyota PickupL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$863.09Shop/Dealer Price$1044.24 - $1583.47
1995 Toyota PickupL4-2.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$878.03Shop/Dealer Price$1062.90 - $1613.32
Show example Toyota Pickup Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(165)

Rating Summary
151
7
3
3
1
151
7
3
3
1

Jimmi

25 years of experience
156 reviews
Jimmi
25 years of experience
Pickup 1990 - Battery - Orlando, FL
What an efficient and pleasant technician to work with. Pointed out things that I need to have serviced in the future and an excellent communicator and very efficient.. Jimmi clearly loves what he's doing and it shows in the attention that he gives. Will call on in the future for all my maintenance needs. Thanks again for a job well done.

Ramon

19 years of experience
157 reviews
Ramon
19 years of experience
Pickup 1993 - Clutch is not working - Tucson, AZ
Ramon was courteous and on time. He was thorough and explained everything he was doing. I have to say, I am so impressed that I will be calling for him for my two other vehicles! And, I have already recommended this service and Ramon to my co-workers! Thank You!

Scott

30 years of experience
950 reviews
Scott
30 years of experience
Pickup 1993 - Control Arm Assembly - Tempe, AZ
He was very helpful and if I ever need more service I will ask for Scott.

Andrew

10 years of experience
440 reviews
Andrew
10 years of experience
Pickup 1992 - Car does not shift from park to drive - Portland, OR
Andrew showed up early, quickly got to it and found the issue...in the dark....in the rain....in a tight space. So much better than towing it to a shop and waiting for days for it to get looked at.

Excellent Rating

(165)

Rating Summary
151
7
3
3
1
151
7
3
3
1
Number of Toyota Pickup services completed
1815+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

P0407 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit Low
P0407 means a problem with the EGR system caused by faulty EGR vacuum solenoid, EGR valve, ground or voltage short in EGR circuit, or bad wiring.
A Buyer’s Guide to the 2012 Toyota 4Runner
The The 2012 Toyota 4Runner was made for people with an active lifestyle. Its design is made to be a light off road alternative to the Jeep Grand Cherokee and the Ford Explorer. Key Features The Toyota 4Runner has a...
10 Best Stores to Buy Auto Parts in Seattle, Washington
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Seattle is Roxbury Complete Auto Supply.

Car has power reduction and grinding noise

Hello. From the symptoms you are describing it would appear that the vehicle may be experiencing some sort of mechanical issue with the engine or transmission. The issues may or may not be related, however that should not be an...

Nissan squeaks a lot on bumpy roads

Usually when you hear squeaks over bumps this is related to a tie rod (https://www.yourmechanic.com/services/tie-rod-end-replacement) or a ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement) that has been dried out. If your tie rods and ball joints are serviceable, they will have grease fittings on...

2014 ford fusion service advancetrac message; ads, traction control, skid control and airbag lights lit up all at same time. Is th

ABS, traction and stability control systems rely on input from a number of sensors to function properly. Faults can be in any one of them from the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement), steering angle sensor (https://www.yourmechanic.com/services/steering-angle-sensor-replacement), wheel speed sensor (https://www.yourmechanic.com/services/abs-speed-sensor-replacement), or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com