Toyota Cressida Clutch pedal goes all the way to the floor Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Clutch pedal goes all the way to the floor Inspection Service

How much does a Clutch pedal goes all the way to the floor Inspection cost?

On average, the cost for a Toyota Cressida Clutch pedal goes all the way to the floor Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Toyota CressidaL6-2.8LService typeClutch pedal goes all the way to the floor InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1992 Toyota CressidaL6-3.0LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1980 Toyota CressidaL6-2.6LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1986 Toyota CressidaL6-2.8LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 Toyota CressidaL6-2.8LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 Toyota CressidaL6-3.0LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1989 Toyota CressidaL6-3.0LService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1987 Toyota CressidaL6-2.8LService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Toyota Cressida Clutch pedal goes all the way to the floor Inspection prices

Like your brake pedal, your clutch pedal should have a firm feel when you press it. It should offer resistance as you push it toward the floor, and stop shy of the actual floorboard. When you depress the pedal, you should also be able to change gears. However, if your clutch pedal goes all the way to the floor and you can’t change gears, there’s definitely something wrong. The problem will depend on the type of clutch system in your car.

How this system works:

There are two types of clutch systems used in manual transmission vehicles – cable operated and hydraulic. Cable systems were more common a few years ago, but hydraulic systems have gained in popularity, so there’s a 50/50 chance you’ll have either.

The simplest way to tell is to open the hood and see if you can spot two components on the firewall that look like master cylinders. One is the master cylinder for your brakes, and the other is the clutch master cylinder. If you don’t see two things that look like master cylinders, you have a cable-operated clutch.

If you have a cable-operated clutch, chances are good that the cable has broken (this is very common, and will occur as your car ages unless you take preemptive action and replace the cable before it snaps). The cable runs from the clutch pedal to the clutch assembly itself, and allows you to engage the clutch and change gears.

If you have a hydraulic clutch, the problem is likely with the master or slave cylinder. These work in the same way as your brake hydraulic system. When you press the pedal, it pressurizes the fluid in the system, which then allows you to change gears. If the fluid is low, or the master or slave cylinder has failed, you won’t be able to change gears.

Common reasons for this to happen:

  • Broken Clutch Cable: The most common reason to have a clutch pedal that goes all the way to the floor is a broken clutch cable. This is extremely common, particularly on older cars. Replacing the cable will allow you to engage the clutch and change gears once more.

  • Missing Connector Rod: The clutch cable runs to a throw out fork and bearing. It connects with a small rod. If this rod is missing, the cable won’t attach to the fork and your pedal will go to the floor.

  • Low Fluid: If you have a hydraulic clutch, there are a couple of other things it could be. One is low fluid in the master/slave cylinder. This can be checked by visually inspecting the reservoir. If the fluid is below the “full” line, then you have low fluid.

  • Failed Clutch Master Cylinder: The most common way for a clutch master cylinder to fail is for the internal seals to begin leaking fluid out (meaning that you’ll be low on fluid). This fluid may or may not run onto the clutch pedal, and it may or may not be visible on the firewall or the back of the engine.

  • Failed Slave Cylinder: A failed slave cylinder is less common than a failed master cylinder, but the symptoms (and causes) are generally the same. Seals break down and begin leaking, leading to low fluid levels in the system.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch pedal, the cable or hydraulic system to verify operation and determine the actual cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the clutch pedal, as well as its connection to either the clutch cable or the master cylinder. The mechanic will check the fluid level in the reservoir if this is a hydraulic system, as well as inspecting for leaks.

How important is this service?

If your clutch pedal goes to the floor, you won’t be able to engage the clutch, and you won’t be able to shift gears. In short, you’ll be stuck. Driving without an operable clutch cable is not recommended. One of our professional mechanics can inspect and repair your clutch system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Peter

28 years of experience
534 reviews
Peter
28 years of experience
Toyota Cressida L6-2.8L - Pre-purchase Car Inspection - Granada Hills, California
Peter was thorough with his inspection and let me know exactly what was wrong with the car.

Peter

28 years of experience
534 reviews
Peter
28 years of experience
Toyota Cressida L6-2.8L - Alternator - Valencia, California
Excellent Job - Peter does great work and knows his stuff

Farnaz

20 years of experience
80 reviews
Farnaz
20 years of experience
Toyota Cressida L6-3.0L - Spark Plug Replacement - Irvine, California
Prompt arrival and excellent service!

Chet

41 years of experience
496 reviews
Chet
41 years of experience
Toyota Cressida L6-2.8L - Car is not starting - San Diego, California
Very knowledgeable

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Toyota Cressida services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

Which Filters in My Car Can Be Cleaned Vs. Replaced?
Car filters clean the air and fluids in your car interior and engine. You can clean the air filter, but you always have to replace the oil filter.
P0325 OBD-II Trouble Code: Knock Sensor Malfunction (Sensor 1, Bank 1)
P0325 code definition Knock Sensor Malfunction (Sensor 1, Bank 1) What the P0325 code means P0325 is a general ODB2 diagnostic trouble...
10 Best Stores to Buy Auto Parts in Cincinnati, Ohio
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Cincinnati is AutoZone.

My vehicle does not want to stay on, I disconnected the TPS and it stays on but the rpm jumps up and down. I've recently replaced

If the RPM's struggle to remain stable, this suggests you may have a vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) or a fuel supply problem. I would recommend plugging the throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) back in in order to properly trace the problem. The...

Could the HTR 50 A fuse be the problem for heat/blower not working?

Hello. Yes fuses can play a part in causing a blower motor to fail. The blower motor also has a resistor that can fail and cause the same symptoms. Both of these components can be tested and replaced if needed....

Gas gauge & pumping gas

Hello, It sounds like you may have two separate issues going on here. Your car has a float type device inside he fuel tank which measures the level of the fuel and sends a signal to the computer which then...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com