Suzuki XL-7 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(105)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(105)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Suzuki XL-7 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Suzuki XL-7V6-3.6LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Suzuki XL-7V6-2.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Suzuki XL-7V6-2.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Suzuki XL-7V6-2.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2005 Suzuki XL-7V6-2.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2002 Suzuki XL-7V6-2.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 Suzuki XL-7V6-3.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2008 Suzuki XL-7V6-3.6LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Suzuki XL-7 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(105)

Rating Summary
99
4
0
0
2
99
4
0
0
2

Greg

22 years of experience
342 reviews
Greg
22 years of experience
Suzuki XL-7 V6-2.7L - Oil Change - Chandler, Arizona
Greg is a true professional! He is thorough, and fully knowledgeable. His attitude is to "get it done, get it done the right way the first time and every time."

Terry

31 years of experience
99 reviews
Terry
31 years of experience
Suzuki XL-7 V6-2.7L - Other Inspections - Fort Worth, Texas
Was not able to fix the problem but I was not charged anything. Thanks!

Daniel

18 years of experience
64 reviews
Daniel
18 years of experience
Suzuki XL-7 V6-3.6L - Tune-up - Bethel Park, Pennsylvania
Excellent, very helpful with what my vehicle needs. Very skilled with a difficult problem with a stick latch. Thank you Daniel.

Johnny

33 years of experience
264 reviews
Johnny
33 years of experience
Suzuki XL-7 V6-2.7L - Car is overheating - Sacramento, California
Quick and easy

Excellent Rating

(105)

Rating Summary
99
4
0
0
2
99
4
0
0
2
Number of Suzuki XL-7 services completed
1155+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Valve Cover Gasket
When When you open the hood of your car to take a look at your engine, you'll find it is kept safe with a valve cover. What keeps this valve cover in place and not moving around is the valve...
Symptoms of Bad or Failing Hood Lift Support Shocks
If the hood suddenly or gradually closes on its own or it doesn't feel as stable, you may need to replace its lift support shocks.
P0228 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit High Input
P0228 P0228 code definition Throttle/Pedal Position Sensor/Switch C Circuit High Input What the P0228 code means P0228 is a generic OBD-II code which indicates that the throttle/pedal position sensor/switch C circuit has a high input problem causing the sensor input...

Getting multiple codes

Hello. When you get these codes together it is typically the result of a vacuum leak. If there is too much air entering the engine, your truck will have idling problems and this will cause issues with the oxygen sensor...

Car struggling to start

The intermittent non starting leads to to a sensor issue. Either the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or the camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) would cause the symptoms you have described. A qualified technician like the ones at YourMechanic will be able to...

cranks but wont start

There may be a downloadable diagnostic trouble code(s) (from the PCM) so I recommend that you request a no start diagnostic (https://www.yourmechanic.com/services/car-is-not-starting-inspection) to first see if there is a quick and ready indication of the problem and thence a solution....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com