Suzuki Verona Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Suzuki Verona Throttle Body Replacement is $743 with $603 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki VeronaL6-2.5LService typeThrottle Body ReplacementEstimate$1360.98Shop/Dealer Price$1666.08 - $2573.26
2006 Suzuki VeronaL6-2.5LService typeThrottle Body ReplacementEstimate$1351.97Shop/Dealer Price$1655.30 - $2561.16
2005 Suzuki VeronaL6-2.5LService typeThrottle Body ReplacementEstimate$1351.97Shop/Dealer Price$1655.32 - $2561.20
Show example Suzuki Verona Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Melvin

15 years of experience
158 reviews
Melvin
15 years of experience
Suzuki Verona L6-2.5L - Check Engine Light is on - Portsmouth, Virginia
Melvin was a pleasure to meet and be around. Extremely courteous and polite. Above all else knowledgeable. If Melvin is available I will be using him every time. Highly recommended?

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Suzuki Verona L6-2.5L - 67,500 Miles Maintenance Service - Walnut Creek, California

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Suzuki Verona L6-2.5L - Engine idle speed is high - Walnut Creek, California
I have nothing but praises for Joshua. He has this incredible ability to troubleshoot issues with cars and armed with knowledge on the subject to his teeth. On top of that, he is also extremely proficient in fixing car issues that do not require troubleshooting. I was so impressed with Josh's sincerity and professionalism that I ended up getting 8 services done in the past month and a half. Of course, for every service, I requested for Josh. When Josh first came to service my car (simple oil change), I was on the verge of getting ready to dispose the car off (a 2004 Suzuki Verona EX, with just 68,000 miles). All thanks to Josh, the car is running better than when it was new (I am serious ... the brand new car had engine trouble and the dealer agreed to replace the engine after a good fight). It is now a pleasure to drive the car and I hope to use it for another 5 years, at least. I strongly recommend Josh to one and all if you ever happen to use YourMechanic.com. For all my car service needs, I will rely on Josh and YourMechanic.com from now on.

Art

26 years of experience
88 reviews
Art
26 years of experience
Suzuki Verona L6-2.5L - engine coolant temperature sensor - Orlando, Florida
Hi,Iam Ronnie and I'm giving a review from what I seen Art is serious about work meaning he didn't waste any time getting to the problem and fixing the problem.Art have thousands of dollars in tools.There is no job to big for him.He have over 20yrs experience in the work that he have chosen to help other.One other thing when he show up at your place he will be driving a mechanic shop on wheels.Thanks Art!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Suzuki Verona services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0341 OBD-II Trouble Code: Camshaft Position Sensor Circuit Range/Performance
P0341 code definition Camshaft Position Sensor Circuit Range/Performance What the P0341 code means P0341 is an OBD-II generic code that says the...
How to Replace a Wheel Hub Assembly
A wheel hub assembly keeps car wheels in place. Wheel bearings and wheel hubs fail when the steering is loose and screeching comes from the wheels.
B2104 OBD-II Trouble Code: Door Passenger Key Cylinder Switch Failure
B2104 trouble code means there's a failure in the passenger door key cylinder switch, caused by a failed component in the switch.

Turn signal won't blink

Hi there. If the turn signals will come on, but will not blink then the flasher module has failed. This module is what turns the lights off and on when the turn signal or hazards are used. It is possible...

Grinding coming from tail shaft area of transmission while releasing the gas pedal traveling 25 miles per hour

Hi there. The grinding sound may be coming from a rear output shaft. In most cases, the transmission yoke or output shaft will wear out over time, or when the inner seal has broken. The grinding is typically due to...

A warning light just came on my 2008 Lincoln mkx it's a car with two swiggley lines below the tires what's that mean?

This symbol is related to your traction control system. Your vehicle is equipped with wheel speed sensors (https://www.yourmechanic.com/services/abs-speed-sensor-replacement) at each of the four wheels which monitor wheel speed while relaying this information simultaneously to the ABS and traction control system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com