Suzuki Sidekick Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Suzuki Sidekick Loud noises when car is put in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Suzuki SidekickL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1993 Suzuki SidekickL4-1.6LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Suzuki SidekickL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Suzuki SidekickL4-1.6LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1994 Suzuki SidekickL4-1.6LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1996 Suzuki SidekickL4-1.8LService typeLoud noises when car is put in gear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Suzuki SidekickL4-1.6LService typeLoud noises when car is put in gear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1995 Suzuki SidekickL4-1.6LService typeLoud noises when car is put in gear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Suzuki Sidekick Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Pardeep

21 years of experience
1100 reviews
Pardeep
21 years of experience
Suzuki Sidekick L4-1.8L - Car is not starting - San Jose, California
Quick, found what the problem was very easily thank you

Russell

24 years of experience
356 reviews
Russell
24 years of experience
Suzuki Sidekick L4-1.6L - Valve Cover Gasket - Portland, Oregon
He showed up early and got the job done before I had to leave for another appointment. Will use again.

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Suzuki Sidekick L4-1.6L - Brake Light Switch - Hollywood, Florida
Watch it, the company charges you BEFORE the work is completed alleging they charge a "pre-authorization" when, in reality, they charge your account. Mr. DeLaCruz knows his job & can refer you to a specialist for electrical work.

Victor

35 years of experience
229 reviews
Victor
35 years of experience
Suzuki Sidekick L4-1.8L - Door does not lock or open - Los Lunas, New Mexico
I would gladly give your company 20 stars for the excellent service that I received from Victor. Is courtesy prompt is professionalism and expertise exceeded my expectations.As a widow and t senior citizen, I was greatly reassured by his calm demeanor and his kindness and desire to make sure that my car was safe for myself and all other citizens driving on the road with me.I would definitely recommend him to anyone who wishes to have a courteous professional and proficient mechanic to evaluate their car and fix whatever could be fixed.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Suzuki Sidekick services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chrysler Town & Country
While While the Chrysler Town & Country has been in production for over half a century, the 2012 Chrysler Town & Country is anything but old-fashioned. The model got a huge overhaul in 2011 and saw a few new upgrades...
How Long Does a Coolant Level Sensor Last?
The The coolant level sensor uses a moveable float device and a reed switch that senses when the radiator has low coolant. Once the sensor detects low coolant, the driver is alerted by a light illuminated on the dashboard. The...
P2422 OBD-II Trouble Code: Evaporative Emissions Control System (EVAP) Vent Valve Stuck Closed
Diagnostic Trouble Code (DTC): P2422 P2422 code definition Evaporative Emissions Control System (EVAP) Vent Valve Stuck Closed Related Trouble Codes: P2441: EVAP...

Slowing pull to right

The ESP means there is a fault detected in the stability system. Wheel speed sensors (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement) are a common cause of ESP issues and most likely will log a fault. The faults should be read out of the ESP module....

Car randomly dies

If the Check Engine Light comes on, fault codes should be stored in the engine control unit, or powertrain control module. While not specific to your year and engine, Chrysler has had a number of vehicles in the last several...

I have a Santa Fe and it has been sputtering and jerking when I come to a complete stop, shortly after dies and will not start bac

The problem sounds like you are flooding out on fuel or have a stuck open valve for the variable intake. Since the vehicle will not restart you will need to have mechanic like one from YourMechanic come to you and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com