Suzuki Sidekick Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Suzuki Sidekick Brake Drum Replacement is $489 with $195 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Suzuki SidekickL4-1.8LService typeBrake Drum ReplacementEstimate$817.47Shop/Dealer Price$963.72 - $1332.73
1994 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$688.29Shop/Dealer Price$817.80 - $1136.46
1997 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$755.47Shop/Dealer Price$901.77 - $1270.81
1989 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$684.21Shop/Dealer Price$812.63 - $1128.17
1998 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$755.47Shop/Dealer Price$901.82 - $1270.90
1996 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$755.47Shop/Dealer Price$901.77 - $1270.81
1997 Suzuki SidekickL4-1.8LService typeBrake Drum ReplacementEstimate$770.97Shop/Dealer Price$916.85 - $1285.58
1992 Suzuki SidekickL4-1.6LService typeBrake Drum ReplacementEstimate$703.79Shop/Dealer Price$834.03 - $1153.24
Show example Suzuki Sidekick Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Suzuki Sidekick L4-1.6L - Brake Light Switch - Hollywood, Florida
Watch it, the company charges you BEFORE the work is completed alleging they charge a "pre-authorization" when, in reality, they charge your account. Mr. DeLaCruz knows his job & can refer you to a specialist for electrical work.

Russell

24 years of experience
356 reviews
Russell
24 years of experience
Suzuki Sidekick L4-1.6L - Valve Cover Gasket - Portland, Oregon
He showed up early and got the job done before I had to leave for another appointment. Will use again.

Victor

35 years of experience
228 reviews
Victor
35 years of experience
Suzuki Sidekick L4-1.8L - Door does not lock or open - Los Lunas, New Mexico
I would gladly give your company 20 stars for the excellent service that I received from Victor. Is courtesy prompt is professionalism and expertise exceeded my expectations.As a widow and t senior citizen, I was greatly reassured by his calm demeanor and his kindness and desire to make sure that my car was safe for myself and all other citizens driving on the road with me.I would definitely recommend him to anyone who wishes to have a courteous professional and proficient mechanic to evaluate their car and fix whatever could be fixed.

Pardeep

21 years of experience
1078 reviews
Pardeep
21 years of experience
Suzuki Sidekick L4-1.8L - Car is not starting - San Jose, California
Quick, found what the problem was very easily thank you

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Suzuki Sidekick services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Power Steering Control Unit Last?
Most Most cars on the road today (and in the past) use a hydraulic power steering system. A pump sends power steering fluid through a series of lines to the power steering rack, which augments your ability to turn the...
North Carolina Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of North Carolina. Speed limits in North Carolina 70 mph: some rural freeways and interstates 65 mph: four-lane, freeway-grade...
How to Improve Automatic Transmission Performance and Reliability
The transmission on automatic cars is improved by changing driving habits, maintaining engine performance, and replacing transmission oil and filter.

Timing belt off track

A timing belt that appears to be slipping its way off its gear, or coming off track, is an indication that the timing belt is loose. When the timing belt starts to slide off its gears, it can rub against...

What happens if you put ow520 oil in a 2011 Chrysler 200?

Hi there- you will likely not notice any difference at all, and it is unlikely to cause any engine damage. The "0" (vs 5) rating has to do with the fluidity of the oil when it is coldest. It will...

Battery light

Hi There, It sounds like you may have a charging problem that may be a result of a faulty alternator or voltage regulator. You may have a failing voltage regulator that could be allowing the alternator (https://www.yourmechanic.com/services/alternator-replacement) to supply too...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com