Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.
Included for free with this service
Online Booking
Mechanic comes to you
12-month / 12k-mile warranty
Free 50 point safety inspection
Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.
On average, the cost for a Subaru Tribeca Coolant Level Sensor Replacement is $148 with $53 for parts and $95 for labor. Prices may vary depending on your location.
| Car | Service | Estimate | Shop/Dealer Price |
|---|---|---|---|
| 2012 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$221.77 | Shop/Dealer Price$258.47 - $346.05 |
| 2013 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$201.77 | Shop/Dealer Price$238.48 - $326.08 |
| 2009 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$201.77 | Shop/Dealer Price$238.48 - $326.08 |
| 2010 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$201.77 | Shop/Dealer Price$238.46 - $326.04 |
| 2014 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$201.77 | Shop/Dealer Price$238.50 - $326.11 |
| 2011 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$201.77 | Shop/Dealer Price$238.48 - $326.08 |
| 2008 Subaru TribecaH6-3.6L | Service typeCoolant Level Sensor Replacement | Estimate$206.77 | Shop/Dealer Price$243.35 - $330.84 |
The coolant level sensor is designed to alert the driver when the coolant level is low and to prevent overheating or damage to the engine. This aids in diagnosing leaks and other dangerous cooling system conditions.
Coolant level sensors can consist of a plastic sensor with a plastic or foam float that sits underneath the coolant reservoir cap. Or, they can be plastic sensors that plug into the radiator or other component of the cooling system.
Some vehicles are equipped with a Low Coolant or Check Coolant warning light, while others may display a picture of the vehicle with a red dot in the engine bay. This is to inform the driver that the coolant needs to be checked or that there is a fault with the sensor.
The Check Coolant warning light may seem like a nuisance, but the system is there for a reason: to inform the driver of potentially dangerous engine conditions.
The Coolant Level Sensor is verified that it needs to be replaced. The coolant is drained to be below the sensor.
The defective Coolant Level Sensor is removed by disconnecting the electrical connection and removing it from the radiator or reservoir.
The new Coolant Level Sensor is installed, connected and the coolant is refilled. Then the cooling system is purged of air.
The Coolant Level Sensor is tested for leaks after system is filled and engine is run.
The vehicle is tested to ensure proper operation of the Cooling System
If you suspect the coolant level sensor has failed, have one of our licensed mechanics come to you to diagnose the issue and replace the part. Our mechanics can determine whether the sensor float is faulty, if the sensor itself is bad, or if there is low coolant or a leak in the system.
While you may wish to ignore the beeping and warning lights in your vehicle, it is important to get a diagnosis for the problem immediately before any further damage occurs, including unwanted coolant loss, engine overheating, and other major issues.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Subaru owners like you.
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
