Subaru Justy Car is slow to accelerate Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,344)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,344)

Car is slow to accelerate Inspection Service

How much does a Car is slow to accelerate Inspection cost?

On average, the cost for a Subaru Justy Car is slow to accelerate Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1995 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1991 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1993 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1989 Subaru JustyL3-1.2LService typeCar is slow to accelerate InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Subaru Justy Car is slow to accelerate Inspection prices

A car that is getting fuel and is properly tuned should take off quickly when the accelerator is pressed. A vehicle that is sluggish or slow to accelerate can be dangerous, especially at intersections and on-ramps.

Modern cars have a very complex system that delivers fuel to the engine and rids of the vehicle of exhaust gases. A failure in any part of this system can lead to a car that is slow to accelerate. In the majority of cases, the problem can be traced back to the fuel system.

A vehicle that is slow to accelerate should be repaired immediately as it can be dangerous to drive.

How this system works:

The fuel system is responsible for supplying fuel to the engine. Fuel is mixed with air, atomized and vaporized in the intake system, which provides power to drive the pistons of the engine. There are a variety of different fuel system types but most of them have the same basic parts.

The fuel tank stores the gasoline. Fuel is pulled through the fuel lines by the fuel pump and is fed into the fuel injectors. Older cars have a carburetor and throttle body injectors instead of fuel injectors. The fuel injectors spray gasoline into the cylinders where it is mixed with air and then ignites during the compression stage. The result is an explosion that moves the pistons.

Common reasons for this to happen:

  • Bad or Clogged Fuel Injector: Fuel injectors can become clogged due to contaminates in the fuel. Fuel injectors, by their very nature, must be very precise in controlling the amount of fuel that goes into the combustion chamber so they have very small passages that deliver the fuel. Over time these tiny passages will become clogged which impedes the delivery of fuel.

When an injector is clogged it can degrade the performance of the vehicle and the car may accelerate slowly or feel that it does not have enough power. Other symptoms include a rough idle, a vehicle that is hard to start and a decrease in fuel efficiency.

  • Defective Fuel Pump: The fuel pump pulls the fuel from the gas tank to the engine via the fuel lines. If the pump stops working, malfunctions, or becomes clogged, it will not supply enough fuel to the injectors. This can cause the vehicle to accelerate slowly, or even sputter and stall, especially at high speeds.

  • Clogged Fuel Filter: The job of the fuel filter is to filter out containments in the fuel and if it becomes clogged it can restrict the amount of fuel that reaches the injectors. This can cause a vehicle to accelerate slowly. Fuel filters are designed to be replaced on a regular basis.

  • Dirty Airflow Sensor: This part detects the mass of air that enters the fuel injection system and hands that information off to the engines’ computer which allows the computer to deliver the proper amount of fuel to the air. These sensors can become dirty or malfunction over time, which results in the wrong data being sent to the computer. A slow accelerating car is the result of this incorrect data. It may also trigger the Check Engine light.

  • Leaking Fuel Line: A leak in the fuel line will drain off enough fuel that it leaves a shortage for the injectors. This not only affects the performance of the car but will also create a dangerous situation. If you smell gasoline in the vicinity of the car or see a puddle of fuel underneath the vehicle, the car should be inspected and repaired immediately.

  • Vacuum Leak: A leak in the vacuum system can affect the ability of the car’s computer system to properly regulate the fuel to air ratio. One of the major symptoms of a vacuum leak is a car that is slow to accelerate or feels like it has a lack of power. In addition the check engine light will probably illuminate.

  • Failing Catalytic Converter: A failing or clogged catalytic converter will prevent the proper amount of air from going into the engine. In most cases the vehicle will run hotter than normal, will accelerate slowly and feel like there is a loss of power. Issues with the catalytic converter tend to be fairly expensive repairs.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the car is slow to accelerate issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car's fuel system for leaks and any defective parts. This includes fuel injectors, fuel pump, fuel filter, airflow sensors and other important components related to the vehicle's slow acceleration. It may be necessary to test drive the car in order to verify the acceleration issue and provide an accurate diagnosis.

How important is this service?

A car that accelerates slowly is a dangerous vehicle to drive, especially at intersections and on ramps. Failing to fix simple fuel system problems will often lead to a more expensive repair down the road and eventually a car that may not run at all. A slow accelerating car should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(2,344)

Rating Summary
2,234
56
17
10
27
2,234
56
17
10
27

Jeremy

20 years of experience
642 reviews
Jeremy
20 years of experience
Subaru Outback H4-2.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Lake Worth, Florida
Exceptionally professional and experienced. He shared some great tips to help me take better care of my car. I will definitely use him again the next time my car needs any repair.

Emanuel

16 years of experience
45 reviews
Emanuel
16 years of experience
Subaru Forester H4-2.5L - Pre-purchase Car Inspection - Norwood, Massachusetts
Emanuel did a great job - when the dealership refused to put the car up on the lift so he could inspect it, he just crawled underneath the car right in the parking lot. Glad he did too - discovered a leaky head gasket that would have been a ~$1k-2k repair in less than a couple years. I had this confirmed with another mechanic as well (since the dealership didn't believe me).

Allan

21 years of experience
16 reviews
Allan
21 years of experience
Subaru Legacy H4-2.2L - Car is not starting - Wendell, North Carolina
Allan was very prompt in his arrival and his diagnosis indicated that new battery terminals needed to be replaced in order to properly perform further diagnostics to determine full resolution of problem. I would recommend Alan for further work to my vehicle.

Jose

17 years of experience
433 reviews
Jose
17 years of experience
Subaru Outback H4-2.5L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Beaverton, Oregon
Jose is an honest hard working guy. Did a great job. Very happy. Will use again for sure.

Excellent Rating

(2,344)

Rating Summary
2,234
56
17
10
27
2,234
56
17
10
27
Number of Subaru services completed
25784+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

P0227 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit Low Input
P0227 P0227 code definition Throttle/Pedal Position Sensor/Switch C Circuit Low Input What the P0227 code means P0227 is a generic OBD-II code indicating that the throttle/pedal position sensor/switch C circuit has a low input problem causing the sensor input to...
How to Safely Break Into Your Own Car
If you locked keys in your car you may need to break into your car to get them out. Use a coat hanger to or slim metal tool to open a locked car door.
Arkansas Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Arkansas. Speed limits in Arkansas 70 mph: rural freeways and interstate highways, as posted 65 mph: trucks on...

Ball Joints / Suspension parts may be damaged.

The best thing to do is put the vehicle on jack stands and remove the tires to the suspension that is to be damaged. Then check the ball joints, control arm bushings, and the control arms and see if there...

how do i know which thermostat to replace in 2013 chrysler 200

The only way to test a thermostat is off the vehicle by heating it to specified temperatures and then measuring the valve opening height to see if the height is within specification. If you are sure one of the thermostats...

2011 CAMRY LE 2.5 NOISE WHEN GOING STRAIGHT AND GOES AWAY WHEN TURNING RIGHT OR MERELY MOVING STEERING TO RIGHT. SOUNDED LIKE A WH

If wheel bearings are installed without using a calibrated torque wrench to apply the hub axle nut to the exact required torque specification, the bearings are more or less instantly destroyed once you start driving on them. This, indeed, is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com