Subaru B9 Tribeca Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(36)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(36)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Subaru B9 Tribeca Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Subaru B9 TribecaH6-3.0LService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2006 Subaru B9 TribecaH6-3.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Subaru B9 Tribeca Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1

Isaac

6 years of experience
53 reviews
Isaac
6 years of experience
Subaru B9 Tribeca H6-3.0L - Brake Pads Replacement (Rear) - Chapel Hill, North Carolina
Isaac appeared to show expedience and knowledge in replacing the rear rotors and brake pads. Job was completed to satisfaction. Car brakes well so far (and without any vibrations). Recommend him highly.

Glen

15 years of experience
19 reviews
Glen
15 years of experience
Subaru B9 Tribeca H6-3.0L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Summerville, South Carolina
Glen was very professional, quick and went the extra mile. Very pleased

Wayne

31 years of experience
102 reviews
Wayne
31 years of experience
Subaru B9 Tribeca H6-3.0L - Strut Assembly Replacement (Front) - Wynnewood, Pennsylvania
Excellent service and attention to detail.

Zackery

5 years of experience
30 reviews
Zackery
5 years of experience
Subaru B9 Tribeca H6-3.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Everett, Washington
AWESOME MECHANIC! PROFESSIONAL WORK DONE, AWESOME PERSONALITY TOO.

Excellent Rating

(36)

Rating Summary
33
2
0
0
1
33
2
0
0
1
Number of Subaru B9 Tribeca services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
700+
experts on our platform

Recent articles & questions

P0054 OBD-II Trouble Code: HO2S Heater Resistance (Bank 1, Sensor 2)
P0054 code definition HO2S Heater Resistance (Bank 1 Sensor 2) What the P0054 code means This code means the Heated Oxygen Sensor...
P2074 OBD-II Trouble Code: Manifold Absolute Pressure/Mass Airflow - Throttle Position Correlation at Higher Load
P2074 P2074 code definition Manifold Absolute Pressure/Mass Airflow - Throttle Position Correlation at Higher Load What the P2074 code means P2074 is an OBD-II generic code for the Engine Control Module (ECM) detecting a final mass airflow adaption stored value...
The Guide To Colored Curb Zones in South Carolina
South South Carolina parking laws: understanding the basics When parking in South Carolina, you need to make sure you understand the rules and laws that are in place. Knowing these will not only help to keep you from getting fines...

Air conditioner not blowing cold

The a/c on these vehicles have a few different things that can render the AC inoperative. The most common is the compressor failure. The compressor failure would require multiple parts to be replaced if it fails. I recommend you have...

The check engine light on for my 2005 Chevrolet Avalanche

Hey there, thanks for writing in about your 2005 Chevrolet Avalanche. If the gas cap was loose but then later taken care of, then the light may be due to another issue. You will need to have the Check Engine...

VSA coming on repeatedlyfor several times then off for several weeks then coming on again.

Hello, thank you for writing in. The VSA warning light relates to the vehicle stability control system. It functions with the ABS system to keep the vehicle on the road in difficult driving conditions. There are multiple sensors and systems...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com