Saturn LS2 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Saturn LS2 Mass Airflow Sensor Replacement is $231 with $136 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LS2V6-3.0LService typeMass Airflow Sensor ReplacementEstimate$386.59Shop/Dealer Price$464.49 - $675.69
Show example Saturn LS2 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0

Phillip

17 years of experience
85 reviews
Phillip
17 years of experience
Saturn LS2 V6-3.0L - Drive Belt Tensioner - San Antonio, Texas
Excellent Service: Phillip arrived on time as scheduled. He completed the work efficiently. The vehicle now operates much better than it did before the belt replacement. The work is documented. An itemized parts list is issued along with an electronic receipt. Excellent service. Thank you. CTomsen

Carlos

28 years of experience
28 reviews
Carlos
28 years of experience
Saturn LS2 V6-3.0L - Oil Change - Austin, Texas
He obviously knows what he's doing.

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
Always top notch service. Very trust worthy.

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn LS2 V6-3.0L - Oil Change - El Cajon, California
Knows his stuff and most importantly, he's honest. On time and no messing around.

Excellent Rating

(13)

Rating Summary
10
3
0
0
0
10
3
0
0
0
Number of Saturn LS2 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Temperature Sensor
If the temperature gauge gives false readings or does not move, you may need to replace the oil temperature sensor.
How Long Does a Speed Timing Sensor Last?
Your Your car’s engine needs a considerable number of sensors in order to operate correctly. Oxygen sensors, the vehicle speed sensor, the mass airflow sensor – these are just a few of them. Your engine also needs a speed timing...
How to Replace an EVP Position Sensor
The EGR valve is monitored by a valve position sensor. This sensor helps your car's EGR system to run more efficiently and better control emissions.

My temperature gauge is fluctuating and my car is not putting out heat anymore, I tried putting coolant in it and there are no leaks.

Hi there. Check the coolant temperature sensor and see if it has a loose connection on the wiring harness. This will cause the gauge to fluctuate up and down as the engine is running. For the heater not working, check...

P0011 trouble code and there is a loud noise behind the engine.

Hi there. The code P0011 (https://www.yourmechanic.com/article/p0011-obd-ii-trouble-code-camshaft-position-a-timing-over-advanced-or-system-performance-bank-1-by-jay-safford) is stored for the camshaft position sensor is not registering to the computer. Check the camshaft position sensor and see if its working and plugged in. It is possible that the sensor has failed...

Camshaft position sensor keep failing after i replace it. after 2 miles the check engine comes back on for that sensor 2003 BMW 745Li

Hello - you don't mention the specific problem codes you are getting, but the problem you are having may not be the cam sensor itself (https://www.yourmechanic.com/question/car-is-running-fine-somewhat-but-have-p0345-code-cam-shaft-position-sensor-by-kerry-a). Rather, the problem could be the "v-shaped" timing chain guide between the cylinder banks....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com